Home

1998 Toyota Camry

My Vehicle:

1998 Toyota Camry Radiator Coolant Hose

We have found 9 Radiator Coolant Hose for

1998 Toyota Camry

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81071

Dayco Radiator Coolant Hose 81071 - Lower, Upper

Position: Lower, Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Position
2.2L L4 CE, LE, XLE Flex Radiator Hose Lower, Upper
Part Interchange
ACDelco 31615
Atlas 553
AutoZone C6408
CARQUEST 25257
Chief C6408
Chrysler MB356625
Duralast 81071
Freshstart 1123
Gates 26408
Gates 25257
Goodyear 52023
NAPA FM72
NAPA FF272
Pirelli 524
Texaco 120
Uniroyal 5023
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	CE, LE, XLE	Flex Radiator Hose	Lower, Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71617

1998 Toyota Camry Radiator Coolant Hose DY 71617

Dayco Radiator Coolant Hose 71617 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 3/16
End 2 Inside Diameter : 1 3/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Position
2.2L L4 CE, LE, XLE Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.2L L4	CE, LE, XLE	Curved Radiator Hose	Upper

Part Interchange

ACDelco	24276L
ACDelco	24358L
ACDelco	24356L
CARQUEST	22270
CARQUEST	21963
CARQUEST	22272
Duralast	E71617
Freshstart	970
Gates	22270
Gates	22272
Gates	21963
Goodyear	62017
Hyundai	25414-39500
Hyundai	25411-39500
NAPA	8653
NAPA	8903
NAPA	8905
Toyota	16571-74190
Toyota	16571-03070
Toyota	16571-03031
Toyota	16571-74191
Toyota	16571-74340
Toyota	16571-74360
Toyota	16571-74280

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22271

1998 Toyota Camry Radiator Coolant Hose ZO 22271

Gates Radiator Coolant Hose 22271 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.1
Inside Diameter 1 : 1.18
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 CE, LE, XLE Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	CE, LE, XLE	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71972

1998 Toyota Camry Radiator Coolant Hose DY 71972

Dayco Radiator Coolant Hose 71972 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 9/32
End 2 Inside Diameter : 1 9/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE Curved Radiator Hose Lower
Part Interchange
ACDelco 24366L
CARQUEST 22306
Duralast E71972
Gates 22306
NAPA 8939
Toyota 16572-0A040
Toyota 16572-20020
Toyota 16572-20040
Toyota 16572-0A020
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21963

1998 Toyota Camry Radiator Coolant Hose ZO 21963

Gates Radiator Coolant Hose 21963 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.1
Inside Diameter 1 : 1.19
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 CE, LE, XLE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	CE, LE, XLE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22309

1998 Toyota Camry Radiator Coolant Hose ZO 22309

Gates Radiator Coolant Hose 22309 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.2
Inside Diameter 1 : 1.3
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22306

1998 Toyota Camry Radiator Coolant Hose ZO 22306

Gates Radiator Coolant Hose 22306 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.9
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71797

1998 Toyota Camry Radiator Coolant Hose DY 71797

Dayco Radiator Coolant Hose 71797 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18 1/4
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	Curved Radiator Hose	Upper

Part Interchange

ACDelco	24367L
ACDelco	24471L
ACDelco	24519L
CARQUEST	22902
CARQUEST	22687
CARQUEST	22309
Duralast	E71797
Freshstart	62520
Gates	22687
Gates	22309
Gates	22902
Goodyear	62609
Goodyear	62520
Hyundai	25411-2C100
NAPA	8942
NAPA	9320
NAPA	9537
Toyota	16571-0A020
Toyota	16571-20050
Toyota	16571-20070
Toyota	16571-0A040
Toyota	16571-0P070
Toyota	16571-20081
Toyota	16571-AA021
Toyota	16571-AA020
Toyota	16571-0A010
Toyota	16571-20080
Toyota	16571-20010
Toyota	16571-20030
Toyota	16571-20020
Toyota	16571-31180

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71679

1998 Toyota Camry Radiator Coolant Hose DY 71679

Dayco Radiator Coolant Hose 71679 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 1 3/16
End 2 Inside Diameter : 1 3/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1998 Toyota Camry Engines.
Engine Sub Model Notes Position
2.2L L4 CE, LE, XLE Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
2.2L L4	CE, LE, XLE	Curved Radiator Hose	Lower

Part Interchange

ACDelco	24277L
ACDelco	24357L
CARQUEST	21964
CARQUEST	22271
Duralast	D71679
Gates	22271
Gates	21964
Goodyear	62452
MasterPro	21964
NAPA	8654
NAPA	8904
Toyota	16572-03070
Toyota	16572-74180
Toyota	16572-74290
Toyota	16574-22010
Toyota	16573-22010
Toyota	16572-03031

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	31615
Atlas	553
AutoZone	C6408
CARQUEST	25257
Chief	C6408
Chrysler	MB356625
Duralast	81071
Freshstart	1123
Gates	26408
Gates	25257
Goodyear	52023
NAPA	FM72
NAPA	FF272
Pirelli	524
Texaco	120
Uniroyal	5023

ACDelco	24366L
CARQUEST	22306
Duralast	E71972
Gates	22306
NAPA	8939
Toyota	16572-0A040
Toyota	16572-20020
Toyota	16572-20040
Toyota	16572-0A020

My Vehicle:

1998 Toyota Camry Radiator Coolant Hose

Dayco Radiator Coolant Hose 81071 - Lower, Upper

Description:

Features:

Dayco Radiator Coolant Hose 71617 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22271 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71972 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21963 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22309 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22306 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71797 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71679 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X