2004 Toyota Camry HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87820

Dayco HVAC Heater Hose 87820 - Heater Inlet, Pipe To Heater

Position: Heater Inlet, Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 5/16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Position
3.0L V6 LE, XLE Small I.D. Heater Hose Pipe To Heater
3.3L V6 SE Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
3.0L V6	LE, XLE	Small I.D. Heater Hose	Pipe To Heater
3.3L V6	SE	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	16518M
ACDelco	16342M
ACDelco	16378M
ACDelco	16261M
CARQUEST	19093
CARQUEST	19583
CARQUEST	19371
CARQUEST	19312
Duralast	D87820
Freshstart	4660
Gates	19371
Gates	19312
Gates	19093
Goodyear	63525
NAPA	11312
NAPA	11583
NAPA	11093
NAPA	11371
Toyota	87245-42380
Toyota	87245-33520
Toyota	87245-06140
Toyota	87245-02500
Toyota	87245-06380
Toyota	87245-0R010

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19372

2004 Toyota Camry HVAC Heater Hose ZO 19372

Gates HVAC Heater Hose 19372 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 LE, XLE Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	LE, XLE	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87821

2004 Toyota Camry HVAC Heater Hose DY 87821

Dayco HVAC Heater Hose 87821 - Heater Outlet, Heater To Pipe

Position: Heater Outlet, Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Position
3.0L V6 LE, XLE Small I.D. Heater Hose Heater To Pipe
3.3L V6 SE Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.0L V6	LE, XLE	Small I.D. Heater Hose	Heater To Pipe
3.3L V6	SE	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16538M
ACDelco	16379M
ACDelco	16260M
CARQUEST	18027
CARQUEST	19372
CARQUEST	19092
Duralast	E87821
Freshstart	4661
Gates	19372
Gates	19092
Gates	18027
Goodyear	63526
NAPA	11092
NAPA	11372
NAPA	10027
Toyota	87245-48C10
Toyota	87245-06390
Toyota	87245-06150
Toyota	87245-0E160

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87818

2004 Toyota Camry HVAC Heater Hose DY 87818

Dayco HVAC Heater Hose 87818 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 5/16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Position
2.4L L4 LE, SE, XLE Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 16644M
ACDelco 16428M
ACDelco 16367M
CARQUEST 19469
CARQUEST 19965
CARQUEST 19356
Duralast E87818
Gates 19356
Gates 19965
Gates 19469
NAPA 11356
NAPA 11965
NAPA 11469
Toyota 87245-07130
Toyota 87245-06160
Toyota 87245-06830
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	LE, SE, XLE	Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87819

2004 Toyota Camry HVAC Heater Hose DY 87819

Dayco HVAC Heater Hose 87819 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Position
2.4L L4 LE, SE, XLE Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.4L L4	LE, SE, XLE	Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16425M
ACDelco	16368M
ACDelco	16301M
CARQUEST	19357
CARQUEST	19466
CARQUEST	19270
Duralast	E87819
Gates	19466
Gates	19357
Gates	19270
Goodyear	63085
Goodyear	63333
Kia	97312-2F400
NAPA	11357
NAPA	11270
NAPA	11466
Toyota	87245-06170
Toyota	87245-06470

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19356

2004 Toyota Camry HVAC Heater Hose ZO 19356

Gates HVAC Heater Hose 19356 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LE, SE, XLE Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LE, SE, XLE	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19355

2004 Toyota Camry HVAC Heater Hose ZO 19355

Gates HVAC Heater Hose 19355 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SE Molded Heater Hose Fuel Type: GAS Intake Manifold To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SE	Molded Heater Hose	Fuel Type: GAS	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19357

2004 Toyota Camry HVAC Heater Hose ZO 19357

Gates HVAC Heater Hose 19357 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 LE, SE, XLE Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	LE, SE, XLE	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19362

2004 Toyota Camry HVAC Heater Hose ZO 19362

Gates HVAC Heater Hose 19362 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 21.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SE Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SE	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19371

2004 Toyota Camry HVAC Heater Hose ZO 19371

Gates HVAC Heater Hose 19371 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 XLE, LE Molded Heater Hose Fuel Type: GAS Intake Manifold To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	XLE, LE	Molded Heater Hose	Fuel Type: GAS	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2004 Toyota Camry HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Pipe-1 To Throttle Body, Throttle Body To Intake Manifold

Position: Pipe-1 To Throttle Body, Throttle Body To Intake Manifold

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2004 Toyota Camry Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	LE, XLE	Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-1 To Throttle Body, Throttle Body To Intake Manifold
3.3L V6	SE	Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-1 To Throttle Body, Throttle Body To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16644M
ACDelco	16428M
ACDelco	16367M
CARQUEST	19469
CARQUEST	19965
CARQUEST	19356
Duralast	E87818
Gates	19356
Gates	19965
Gates	19469
NAPA	11356
NAPA	11965
NAPA	11469
Toyota	87245-07130
Toyota	87245-06160
Toyota	87245-06830

My Vehicle:

2004 Toyota Camry HVAC Heater Hose

Dayco HVAC Heater Hose 87820 - Heater Inlet, Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19372 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87821 - Heater Outlet, Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87818 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87819 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19356 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19355 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19357 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19362 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19371 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Pipe-1 To Throttle Body, Throttle Body To Intake Manifold

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X