2013 Toyota Corolla HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18552

Gates HVAC Heater Hose 18552 - Throttle Body To Pipe

Position: Throttle Body To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.7
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18553

2013 Toyota Corolla HVAC Heater Hose ZO 18553

Gates HVAC Heater Hose 18553 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.5
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18554

2013 Toyota Corolla HVAC Heater Hose ZO 18554

Gates HVAC Heater Hose 18554 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.2
Inside Diameter 1 : .29
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

2013 Toyota Corolla HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Heater Inlet

Position: Heater Inlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Position
1.8L L4 CE, L, LE, S Cut to Fit - 90? Molded Coolant Hose Heater Inlet

Engine	Sub Model	Notes	Position
1.8L L4	CE, L, LE, S	Cut to Fit - 90? Molded Coolant Hose	Heater Inlet

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87725

2013 Toyota Corolla HVAC Heater Hose DY 87725

Dayco HVAC Heater Hose 87725 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Position
1.8L L4 CE, L, LE, S Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16032M
ACDelco 14764S
ACDelco 14143S
CARQUEST 18962
Chrysler 55056965AA
Duralast C87725
Ford EB8Z 1847A
Freshstart 4474
Gates 18710
Gates 18962
Gates 18641
Goodyear 63201
NAPA 10710
NAPA 10962
NAPA 10641
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	CE, L, LE, S	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19530

2013 Toyota Corolla HVAC Heater Hose ZO 19530

Gates HVAC Heater Hose 19530 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 18025

2013 Toyota Corolla HVAC Heater Hose ZO 18025

Gates HVAC Heater Hose 18025 - Water Inlet To Pipe

Position: Water Inlet To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.8
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Water Inlet To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Water Inlet To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19529

2013 Toyota Corolla HVAC Heater Hose ZO 19529

Gates HVAC Heater Hose 19529 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2013 Toyota Corolla HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Cut to Length, 22" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	CE, L, LE, S, XLE	Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2013 Toyota Corolla HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe To Water Inlet

Position: Pipe To Water Inlet

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Toyota Corolla Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 CE, L, LE, S, XLE Cut to Length, 13" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe To Water Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16032M
ACDelco	14764S
ACDelco	14143S
CARQUEST	18962
Chrysler	55056965AA
Duralast	C87725
Ford	EB8Z 1847A
Freshstart	4474
Gates	18710
Gates	18962
Gates	18641
Goodyear	63201
NAPA	10710
NAPA	10962
NAPA	10641

My Vehicle:

2013 Toyota Corolla HVAC Heater Hose

Gates HVAC Heater Hose 18552 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18553 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18554 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87725 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19530 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18025 - Water Inlet To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19529 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe To Water Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X