2013 Toyota Highlander HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18637

Gates HVAC Heater Hose 18637 - Inverter Cooling Hose-6

Position: Inverter Cooling Hose-6

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.22
Inside Diameter 1 : .41
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-6
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-6

Part Name: HVAC Heater HoseBrand: GatesPart#: 19025

2013 Toyota Highlander HVAC Heater Hose ZO 19025

Gates HVAC Heater Hose 19025 - Inverter Cooling Hose-4

Position: Inverter Cooling Hose-4

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Cut to fit - Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-4
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Cut to fit - Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-4

Part Name: HVAC Heater HoseBrand: GatesPart#: 18239

2013 Toyota Highlander HVAC Heater Hose ZO 18239

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base, Plus Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18119

2013 Toyota Highlander HVAC Heater Hose ZO 18119

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe

Position: Throttle Body To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.5
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base, Plus Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18351

2013 Toyota Highlander HVAC Heater Hose ZO 18351

Gates HVAC Heater Hose 18351 - Heater To Tee-1

Position: Heater To Tee-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 27.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base, Plus Molded Heater Hose Fuel Type: GAS Heater To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19035

2013 Toyota Highlander HVAC Heater Hose ZO 19035

Gates HVAC Heater Hose 19035 - Auxiliary Water Pump Inlet

Position: Auxiliary Water Pump Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Molded Heater Hose Fuel Type: ELECTRIC/GAS Auxiliary Water Pump Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Auxiliary Water Pump Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87821

2013 Toyota Highlander HVAC Heater Hose DY 87821

Dayco HVAC Heater Hose 87821 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Position
3.5L V6 Base, Limited, Plus, SE w/o Aux. Heater - Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.5L V6	Base, Limited, Plus, SE	w/o Aux. Heater - Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	16538M
ACDelco	16379M
ACDelco	16260M
CARQUEST	18027
CARQUEST	19372
CARQUEST	19092
Duralast	E87821
Freshstart	4661
Gates	19372
Gates	19092
Gates	18027
Goodyear	63526
NAPA	11092
NAPA	11372
NAPA	10027
Toyota	87245-48C10
Toyota	87245-06390
Toyota	87245-06150
Toyota	87245-0E160

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2013 Toyota Highlander HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Auxiliary Radiator Outlet

Position: Auxiliary Radiator Outlet

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Cut to fit - 90º Molded Heater Hose Fuel Type: ELECTRIC/GAS Auxiliary Radiator Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Cut to fit - 90º Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Auxiliary Radiator Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86820

2013 Toyota Highlander HVAC Heater Hose DY 86820

Dayco HVAC Heater Hose 86820 - Auxiliary Water Pump Inlet

Position: Auxiliary Water Pump Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 9/16
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 9/16
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Position
3.5L V6 Hybrid, Hybrid Limited Cut to Fit - Small I.D. Heater Hose Auxiliary Water Pump Inlet
Part Interchange
ACDelco 14055S
CARQUEST 18403
Duralast B86820
Gates 18403
NAPA 10403
Toyota 87245-60D40
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Cut to Fit - Small I.D. Heater Hose	Auxiliary Water Pump Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19568

2013 Toyota Highlander HVAC Heater Hose ZO 19568

Gates HVAC Heater Hose 19568 - Inverter Cooling Hose-1

Position: Inverter Cooling Hose-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Hybrid, Hybrid Limited	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87854

2013 Toyota Highlander HVAC Heater Hose DY 87854

Dayco HVAC Heater Hose 87854 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Position
3.5L V6 Base, Limited, Plus, SE w/o Aux. Heater - Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
3.5L V6	Base, Limited, Plus, SE	w/o Aux. Heater - Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	18097L
ACDelco	16404M
ACDelco	16537M
ACDelco	14533S
ACDelco	16119M
ACDelco	16375M
ACDelco	16120M
ACDelco	16462M
CARQUEST	18026
CARQUEST	19571
CARQUEST	19513
CARQUEST	19368
CARQUEST	19015
CARQUEST	18984
Chrysler	04677587AB
Duralast	E87854
Ford	F3XY-18472-F
Ford	F3XY-18472-E
Gates	19368
Gates	19571
Gates	19015
Gates	19425
Gates	19513
Gates	18026
Gates	18984
Gates	18985
Goodyear	63063
Honda	79721-SXS-A01
NAPA	11015
NAPA	11513
NAPA	11368
NAPA	10985
NAPA	11888
NAPA	10984
NAPA	11425
NAPA	10026
Subaru (cars)	72411-AG00A
Subaru (cars)	72411-AG00B
Toyota	87245-0E150
Toyota	87245-1A580
Toyota	87245-48C00
Toyota	87245-48201

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18350

2013 Toyota Highlander HVAC Heater Hose ZO 18350

Gates HVAC Heater Hose 18350 - Heater To Tee-2

Position: Heater To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.8
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base, Plus Molded Heater Hose Fuel Type: GAS Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Molded Heater Hose	Fuel Type: GAS	Heater To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2013 Toyota Highlander HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Tee-1 To Auxiliary Air Conditioning, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Engine

Position: Tee-1 To Auxiliary Air Conditioning, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2013 Toyota Highlander Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Cut to Length, 13" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-2 To Engine
3.5L V6	Base, Limited, Plus, SE, Base Premium, Sport Premium	W/Aux. A.C.; Cut to Length, 17" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Auxiliary Air Conditioning, Tee-2 To Auxiliary Air Conditioning

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2013 Toyota Highlander HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Water Pump Outlet, Heater To Tee-1, Heater To Tee-2, Inverter Cooling Hose-5, Tee-1 To Pipe-1, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Pipe-2

Position: Auxiliary Water Pump Outlet, Heater To Tee-1, Heater To Tee-2, Inverter Cooling Hose-5, Tee-1 To Pipe-1, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2013 Toyota Highlander Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, Plus	Cut to Length, 19" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-2 To Auxiliary Air Conditioning
3.5L V6	Hybrid, Hybrid Limited, Base, Limited, Plus, SE, Base Premium, Sport Premium	W/Aux. A.C.; Cut to Length, 20" - Straight Heater Hose (Standard)	Fuel Type: ELECTRIC/GAS, GAS	Auxiliary Water Pump Outlet, Heater To Tee-1, Heater To Tee-2, Inverter Cooling Hose-5, Tee-1 To Pipe-1, Tee-2 To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 24178

2013 Toyota Highlander HVAC Heater Hose ZO 24178

Gates HVAC Heater Hose 24178 - Auxiliary Radiator Inlet

Position: Auxiliary Radiator Inlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 27.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Highlander Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Hybrid, Hybrid Limited Molded Coolant Hose Fuel Type: ELECTRIC/GAS Auxiliary Radiator Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14055S
CARQUEST	18403
Duralast	B86820
Gates	18403
NAPA	10403
Toyota	87245-60D40

My Vehicle:

2013 Toyota Highlander HVAC Heater Hose

Gates HVAC Heater Hose 18637 - Inverter Cooling Hose-6

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19025 - Inverter Cooling Hose-4

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18351 - Heater To Tee-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19035 - Auxiliary Water Pump Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87821 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Auxiliary Radiator Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86820 - Auxiliary Water Pump Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19568 - Inverter Cooling Hose-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87854 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18350 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Tee-1 To Auxiliary Air Conditioning, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Water Pump Outlet, Heater To Tee-1, Heater To Tee-2, Inverter Cooling Hose-5, Tee-1 To Pipe-1, Tee-2 To Auxiliary Air Conditioning, Tee-2 To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24178 - Auxiliary Radiator Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X