2013 Toyota Land Cruiser HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18775

Gates HVAC Heater Hose 18775 - Tee-2 To Auxiliary Heater

Position: Tee-2 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Molded Heater Hose Fuel Type: GAS Tee-2 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87676

2013 Toyota Land Cruiser HVAC Heater Hose DY 87676

Dayco HVAC Heater Hose 87676 - Tee-1 To Auxiliary Heater

Position: Tee-1 To Auxiliary Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Position
5.7L V8 Base Cut to Fit - Small I.D. Heater Hose Tee-1 To Auxiliary Heater
Part Interchange
ACDelco 14123S
ACDelco 14562S
Acura 79721-S3V-A11
CARQUEST 18822
CARQUEST 18040
Duralast B87676
Freshstart 4509
Gates 18822
Gates 18040
Goodyear 63236
Honda 79721-S3V-A11
NAPA 10822
NAPA 10040
V&W 303676
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	Base	Cut to Fit - Small I.D. Heater Hose	Tee-1 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 20338

2013 Toyota Land Cruiser HVAC Heater Hose ZO 20338

Gates HVAC Heater Hose 20338 - Tee-1 To Engine, Tee-2 To Engine

Position: Tee-1 To Engine, Tee-2 To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 4

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Molded Coolant Hose Fuel Type: GAS Tee-1 To Engine, Tee-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Molded Coolant Hose	Fuel Type: GAS	Tee-1 To Engine, Tee-2 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19183

2013 Toyota Land Cruiser HVAC Heater Hose ZO 19183

Gates HVAC Heater Hose 19183 - Tee-1 To Auxiliary Heater

Position: Tee-1 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-1 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87884

2013 Toyota Land Cruiser HVAC Heater Hose DY 87884

Dayco HVAC Heater Hose 87884 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Position
5.7L V8 Base Cut to Fit - Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 16539M
ACDelco 18242L
CARQUEST 18029
CARQUEST 19117
Duralast D87884
Gates 19117
Gates 18029
General Motors 19130010
General Motors 15263237
NAPA 10029
NAPA 11117
Toyota 87245-0C210
Toyota 87245-0C211
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	Base	Cut to Fit - Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87806

2013 Toyota Land Cruiser HVAC Heater Hose DY 87806

Dayco HVAC Heater Hose 87806 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Position
5.7L V8 Base Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
5.7L V8	Base	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	14113S
ACDelco	14558S
ACDelco	16060M
CARQUEST	18028
CARQUEST	18789
CARQUEST	18810
Duralast	C87806
Gates	18789
Gates	18810
Gates	18028
Honda	79720-SD4-000
Kia	0K019-61-212E
Kia	0K019-61-212
NAPA	10028
NAPA	10789
NAPA	10810
Toyota	87245-0C200
Toyota	87245-0C201

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87784

2013 Toyota Land Cruiser HVAC Heater Hose DY 87784

Dayco HVAC Heater Hose 87784 - Heater To Tee-2

Position: Heater To Tee-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Position
5.7L V8 Base Small I.D. Heater Hose Heater To Tee-2

Engine	Sub Model	Notes	Position
5.7L V8	Base	Small I.D. Heater Hose	Heater To Tee-2

Part Interchange

ACDelco	14418S
ACDelco	14425S
ACDelco	14396S
CARQUEST	19375
CARQUEST	19315
Chrysler	55115895AB
Duralast	C87784
Gates	19375
Gates	19359
Gates	19315
General Motors	12603191
General Motors	88970287
Honda	79721-TM8-A00
NAPA	11315
NAPA	11375
NAPA	11540
Toyota	87245-0C390
Toyota	87245-01140
Toyota	87245-3A780

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2013 Toyota Land Cruiser HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Tee-1, Heater To Tee-2

Position: Heater To Tee-1, Heater To Tee-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Tee-1, Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2013 Toyota Land Cruiser HVAC Heater Hose

Gates HVAC Heater Hose 18775 - Tee-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87676 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20338 - Tee-1 To Engine, Tee-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19183 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87884 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87806 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87784 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14123S
ACDelco	14562S
Acura	79721-S3V-A11
CARQUEST	18822
CARQUEST	18040
Duralast	B87676
Freshstart	4509
Gates	18822
Gates	18040
Goodyear	63236
Honda	79721-S3V-A11
NAPA	10822
NAPA	10040
V&W	303676

ACDelco	16539M
ACDelco	18242L
CARQUEST	18029
CARQUEST	19117
Duralast	D87884
Gates	19117
Gates	18029
General Motors	19130010
General Motors	15263237
NAPA	10029
NAPA	11117
Toyota	87245-0C210
Toyota	87245-0C211

My Vehicle:

2013 Toyota Land Cruiser HVAC Heater Hose

Gates HVAC Heater Hose 18775 - Tee-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87676 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20338 - Tee-1 To Engine, Tee-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19183 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87884 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87806 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87784 - Heater To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X