Home

2014 Toyota Land Cruiser

My Vehicle:

2014 Toyota Land Cruiser HVAC Heater Hose

We have found 6 HVAC Heater Hose for

2014 Toyota Land Cruiser

Part Name: HVAC Heater HoseBrand: GatesPart#: 18775

Gates HVAC Heater Hose 18775 - Tee-2 To Auxiliary Heater

Position: Tee-2 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.1
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Molded Heater Hose Fuel Type: GAS Tee-2 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 20338

2014 Toyota Land Cruiser HVAC Heater Hose ZO 20338

Gates HVAC Heater Hose 20338 - Tee-1 To Engine, Tee-2 To Engine

Position: Tee-1 To Engine, Tee-2 To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 4

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Molded Coolant Hose Fuel Type: GAS Tee-1 To Engine, Tee-2 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Molded Coolant Hose	Fuel Type: GAS	Tee-1 To Engine, Tee-2 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19183

2014 Toyota Land Cruiser HVAC Heater Hose ZO 19183

Gates HVAC Heater Hose 19183 - Tee-1 To Auxiliary Heater

Position: Tee-1 To Auxiliary Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.6
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Cut to fit - Molded Heater Hose Fuel Type: GAS Tee-1 To Auxiliary Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Auxiliary Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18812

2014 Toyota Land Cruiser HVAC Heater Hose ZO 18812

Gates HVAC Heater Hose 18812 - Crossover To Pipe

Position: Crossover To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Molded Heater Hose Fuel Type: GAS Crossover To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Molded Heater Hose	Fuel Type: GAS	Crossover To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2014 Toyota Land Cruiser HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Engine To Oil Cooler Pipe-1

Position: Engine To Oil Cooler Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Oil Cooler Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	Base, VX	Cut to Length, 9" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Oil Cooler Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2014 Toyota Land Cruiser HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Tee-1, Heater To Tee-2

Position: Heater To Tee-1, Heater To Tee-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2014 Toyota Land Cruiser Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 Base, VX Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Tee-1, Heater To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2014 Toyota Land Cruiser HVAC Heater Hose

Gates HVAC Heater Hose 18775 - Tee-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20338 - Tee-1 To Engine, Tee-2 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19183 - Tee-1 To Auxiliary Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18812 - Crossover To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Engine To Oil Cooler Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Tee-1, Heater To Tee-2

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X