1993 Toyota Pickup HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86800

Dayco HVAC Heater Hose 86800 - Auxiliary Heater Pipe To Tee

Position: Auxiliary Heater Pipe To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8 1/4
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
3.0L V6 Base, DLX, SR5 Small I.D. Heater Hose Auxiliary Heater Pipe To Tee

Engine	Sub Model	Notes	Position
3.0L V6	Base, DLX, SR5	Small I.D. Heater Hose	Auxiliary Heater Pipe To Tee

Part Interchange

ACDelco	14001S
CARQUEST	18020
Datsun/Nissan	14056-65Y10
Datsun/Nissan	14056-86G02
Datsun/Nissan	14056-D3310
Datsun/Nissan	14056-40F12
Datsun/Nissan	14056-88G02
Datsun/Nissan	14056-97000
Datsun/Nissan	14055-57Y12
Datsun/Nissan	14055-D4200
Datsun/Nissan	14056-30P21
Datsun/Nissan	14056-30P24
Datsun/Nissan	14056-30R16
Datsun/Nissan	14056-40F04
Duralast	B86800
Ford	F5TH-18C266-AB
Gates	18020
Goodyear	64310
Honda	19506-PC6-000
Honda	19508-PK2-000
Honda	19510-PH3-000
Honda	19511-PH3-J00
Honda	19511-PH3-000
Honda	19514-PJ0-660
NAPA	10020
Toyota	16264-16050
Toyota	16264-62030
Toyota	16267-16040
Toyota	16281-62010
Toyota	16267-76010
Toyota	16261-73070
V&W	302800

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18010

1993 Toyota Pickup HVAC Heater Hose ZO 18010

Gates HVAC Heater Hose 18010 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Tee-2 To Auxiliary Heater Pipe-2

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Tee-2 To Auxiliary Heater Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater
3.0L V6	Base, DLX, SR5	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee-2 To Auxiliary Heater Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80413

1993 Toyota Pickup HVAC Heater Hose DY 80413

Dayco HVAC Heater Hose 80413 - Heater To Pipe

Position: Heater To Pipe

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
3.0L V6 Base, DLX, SR5 90? Molded Coolant Hose Heater To Pipe

Engine	Sub Model	Notes	Position
3.0L V6	Base, DLX, SR5	90? Molded Coolant Hose	Heater To Pipe

Part Interchange

ACDelco	18155L
ACDelco	16359M
ACDelco	16173M
ACDelco	16172M
CARQUEST	19675
CARQUEST	28476
CARQUEST	19674
Chrysler	4767152
Chrysler	4767152AC
Datsun/Nissan	92400-7S010
Duralast	E80413
Ford	3F1H-18K579-BA
Freshstart	4203
Gates	28476
Gates	19831
Gates	19675
Gates	19674
General Motors	96539591
General Motors	96536531
General Motors	22685161
General Motors	3728191
General Motors	25559279
General Motors	25559278
Goodyear	63303
Goodyear	63918
Goodyear	63304
NAPA	11831
NAPA	9817

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28474

1993 Toyota Pickup HVAC Heater Hose ZO 28474

Gates HVAC Heater Hose 28474 - Heater To Valve

Position: Heater To Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	W/O Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve
3.0L V6	Base, DLX, SR5	W/O Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

1993 Toyota Pickup HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Heater To Valve, Valve To Heater

Position: Heater To Valve, Valve To Heater

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 90? Molded Coolant Hose Valve To Heater
3.0L V6 Base, DLX, SR5 90? Molded Coolant Hose Heater To Valve

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	90? Molded Coolant Hose	Valve To Heater
3.0L V6	Base, DLX, SR5	90? Molded Coolant Hose	Heater To Valve

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86801

1993 Toyota Pickup HVAC Heater Hose DY 86801

Dayco HVAC Heater Hose 86801 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Pipe To Engine
3.0L V6 Base, DLX, SR5 Small I.D. Heater Hose Pipe To Engine

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Pipe To Engine
3.0L V6	Base, DLX, SR5	Small I.D. Heater Hose	Pipe To Engine

Part Interchange

ACDelco	16001M
CARQUEST	18021
Datsun/Nissan	14056-57Y11
Duralast	D86801
Freshstart	4363
Gates	18021
Goodyear	63100
Honda	19506-PK1-600
Honda	19513-PT2-000
NAPA	10021
Toyota	16282-65010
Toyota	16264-88381
Toyota	16264-88383
Toyota	16281-65010
Toyota	16267-88382
Toyota	16261-62020
V&W	302801

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87658

1993 Toyota Pickup HVAC Heater Hose DY 87658

Dayco HVAC Heater Hose 87658 - Pipe To Valve

Position: Pipe To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Pipe To Valve
Part Interchange
ACDelco 16060M
CARQUEST 18789
Duralast D87658
Freshstart 4508
Gates 18789
General Motors 10314361
General Motors 10378492
Goodyear 63235
NAPA 10789
V&W 303658
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Pipe To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87855

1993 Toyota Pickup HVAC Heater Hose DY 87855

Dayco HVAC Heater Hose 87855 - Auxiliary Heater Pipe To Tee

Position: Auxiliary Heater Pipe To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 1/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Auxiliary Heater Pipe To Tee
Part Interchange
ACDelco 14458S
ACDelco 14150S
CARQUEST 19019
Chrysler 4596716AC
Duralast B87855
Gates 19441
Gates 19019
Goodyear 64325
NAPA 11441
NAPA 11019
Toyota 87245-35100
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Auxiliary Heater Pipe To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 18789

1993 Toyota Pickup HVAC Heater Hose ZO 18789

Gates HVAC Heater Hose 18789 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

1993 Toyota Pickup HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Position: Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, DLX, SR5 Molded Heater Hose Fuel Type: GAS Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, DLX, SR5	Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86831

1993 Toyota Pickup HVAC Heater Hose DY 86831

Dayco HVAC Heater Hose 86831 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/16
End 1 Outside Diameter : 5/8
End 2 Inside Diameter : 5/16
End 2 Outside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Engine To Throttle Body
Part Interchange
ACDelco 14661S
ACDelco 14030S
CARQUEST 18222
CARQUEST 18376
Duralast B86831
Gates 18222
Gates 18376
NAPA 10376
NAPA 10222
Toyota 16261-28050
Toyota 16261-0H010
Toyota 16264-35030
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18021

1993 Toyota Pickup HVAC Heater Hose ZO 18021

Gates HVAC Heater Hose 18021 - Pipe-4 To Engine, Pipe-5 To Engine

Position: Pipe-4 To Engine, Pipe-5 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-5 To Engine
3.0L V6	Base, DLX, SR5	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-4 To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87687

1993 Toyota Pickup HVAC Heater Hose DY 87687

Dayco HVAC Heater Hose 87687 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20 1/4
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18049L
CARQUEST 18848
Duralast E87687
Freshstart 4512
Gates 18848
Goodyear 63239
NAPA 10848
Toyota 87245-89219
V&W 303687
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86817

1993 Toyota Pickup HVAC Heater Hose DY 86817

Dayco HVAC Heater Hose 86817 - Throttle Body To Engine

Position: Throttle Body To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7-1/2
End 1 Inside Diameter : 5/16
End 2 Inside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX, RN02 Small I.D. Heater Hose Throttle Body To Engine

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX, RN02	Small I.D. Heater Hose	Throttle Body To Engine

Part Interchange

ACDelco	14040S
ACDelco	14042S
ACDelco	14031S
ACDelco	14588S
CARQUEST	18223
CARQUEST	18099
CARQUEST	18238
Datsun/Nissan	14046-1E413
Duralast	B86817
Gates	18240
Gates	18238
Gates	18223
Gates	18099
NAPA	10238
NAPA	10223
NAPA	10099
NAPA	10240
Toyota	16267-35030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18797

1993 Toyota Pickup HVAC Heater Hose ZO 18797

Gates HVAC Heater Hose 18797 - Valve To Tee-2

Position: Valve To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Valve To Tee-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Valve To Tee-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18848

1993 Toyota Pickup HVAC Heater Hose ZO 18848

Gates HVAC Heater Hose 18848 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.7
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19019

1993 Toyota Pickup HVAC Heater Hose ZO 19019

Gates HVAC Heater Hose 19019 - Pipe To Engine, Tee-1 To Pipe

Position: Pipe To Engine, Tee-1 To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.1
Inside Diameter 1 : .62
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee-1 To Pipe
3.0L V6	Base, DLX, SR5	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Pipe To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19603

1993 Toyota Pickup HVAC Heater Hose ZO 19603

Gates HVAC Heater Hose 19603 - Heater To Pipe, Heater To Tee-1, Pipe-1 To Engine

Position: Heater To Pipe, Heater To Tee-1, Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, DLX, SR5 W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe, Heater To Tee-1, Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, DLX, SR5	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe, Heater To Tee-1, Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18222

1993 Toyota Pickup HVAC Heater Hose ZO 18222

Gates HVAC Heater Hose 18222 - Throttle Body To Engine

Position: Throttle Body To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 Molded Heater Hose Fuel Type: GAS Throttle Body To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18223

1993 Toyota Pickup HVAC Heater Hose ZO 18223

Gates HVAC Heater Hose 18223 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18764

1993 Toyota Pickup HVAC Heater Hose ZO 18764

Gates HVAC Heater Hose 18764 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.3
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, DLX, SR5 W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, DLX, SR5	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18993

1993 Toyota Pickup HVAC Heater Hose ZO 18993

Gates HVAC Heater Hose 18993 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.1
Inside Diameter 1 : .62
Inside Diameter 2 : .7
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, DLX, SR5 W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, DLX, SR5	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

1993 Toyota Pickup HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Auxiliary Heater Pipe-2 To Auxiliary Heater, Pipe-2 To Engine, Pipe-3 To Engine

Position: Auxiliary Heater Pipe-2 To Auxiliary Heater, Pipe-2 To Engine, Pipe-3 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Auxiliary Heater, Pipe-3 To Engine
3.0L V6	Base, DLX, SR5	Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-2 To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

1993 Toyota Pickup HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Auxiliary Heater Pipe-2 To Tee-2, Pipe-3 To Engine, Pipe-4 To Engine

Position: Auxiliary Heater Pipe-2 To Tee-2, Pipe-3 To Engine, Pipe-4 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 1993 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, RN02	Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Tee-2, Pipe-4 To Engine
3.0L V6	Base, DLX, SR5	Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-3 To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

1993 Toyota Pickup HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Valve, Tee-2 To Pipe-2

Position: Heater To Valve, Tee-2 To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1993 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, RN02 W/Aux. Heater; Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Heater To Valve, Tee-2 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16060M
CARQUEST	18789
Duralast	D87658
Freshstart	4508
Gates	18789
General Motors	10314361
General Motors	10378492
Goodyear	63235
NAPA	10789
V&W	303658

ACDelco	14458S
ACDelco	14150S
CARQUEST	19019
Chrysler	4596716AC
Duralast	B87855
Gates	19441
Gates	19019
Goodyear	64325
NAPA	11441
NAPA	11019
Toyota	87245-35100

ACDelco	14661S
ACDelco	14030S
CARQUEST	18222
CARQUEST	18376
Duralast	B86831
Gates	18222
Gates	18376
NAPA	10376
NAPA	10222
Toyota	16261-28050
Toyota	16261-0H010
Toyota	16264-35030

ACDelco	18049L
CARQUEST	18848
Duralast	E87687
Freshstart	4512
Gates	18848
Goodyear	63239
NAPA	10848
Toyota	87245-89219
V&W	303687

My Vehicle:

1993 Toyota Pickup HVAC Heater Hose

Dayco HVAC Heater Hose 86800 - Auxiliary Heater Pipe To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18010 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Tee-2 To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80413 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28474 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Heater To Valve, Valve To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86801 - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87658 - Pipe To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87855 - Auxiliary Heater Pipe To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18789 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86831 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18021 - Pipe-4 To Engine, Pipe-5 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87687 - Heater To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86817 - Throttle Body To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18797 - Valve To Tee-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18848 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19019 - Pipe To Engine, Tee-1 To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19603 - Heater To Pipe, Heater To Tee-1, Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18222 - Throttle Body To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18223 - Engine To Throttle Body

Description: