2008 Toyota Prius HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19400

Gates HVAC Heater Hose 19400 - Inverter Cooling Hose-5

Position: Inverter Cooling Hose-5

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-5
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-5

Part Name: HVAC Heater HoseBrand: GatesPart#: 19397

2008 Toyota Prius HVAC Heater Hose ZO 19397

Gates HVAC Heater Hose 19397 - Inverter Cooling Hose-2

Position: Inverter Cooling Hose-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 31.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 19398

2008 Toyota Prius HVAC Heater Hose ZO 19398

Gates HVAC Heater Hose 19398 - Inverter Cooling Hose-3

Position: Inverter Cooling Hose-3

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 27.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-3

Part Name: HVAC Heater HoseBrand: GatesPart#: 19402

2008 Toyota Prius HVAC Heater Hose ZO 19402

Gates HVAC Heater Hose 19402 - Coolant Heat Storage Tank To Auxiliary Water Pump

Position: Coolant Heat Storage Tank To Auxiliary Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Coolant Heat Storage Tank To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Coolant Heat Storage Tank To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19396

2008 Toyota Prius HVAC Heater Hose ZO 19396

Gates HVAC Heater Hose 19396 - Inverter Cooling Hose-1

Position: Inverter Cooling Hose-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87925

2008 Toyota Prius HVAC Heater Hose DY 87925

Dayco HVAC Heater Hose 87925 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 3/4
End 1 Inside Diameter : 21/32
End 2 Inside Diameter : 21/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Position
1.5L L4 Base, Touring Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 14445S
CARQUEST 19394
Duralast C87925
Gates 19394
Honda 87245-47230
NAPA 11394
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.5L L4	Base, Touring	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87926

2008 Toyota Prius HVAC Heater Hose DY 87926

Dayco HVAC Heater Hose 87926 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/2
End 1 Inside Diameter : 9/16
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 9/16
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Position
1.5L L4 Base, Touring Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 16389M
CARQUEST 19395
Duralast D87926
Gates 19395
Honda 87245-47240
NAPA 11395
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.5L L4	Base, Touring	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19401

2008 Toyota Prius HVAC Heater Hose ZO 19401

Gates HVAC Heater Hose 19401 - Auxiliary Water Pump To Water Bypass Pipe

Position: Auxiliary Water Pump To Water Bypass Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 32.6
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Auxiliary Water Pump To Water Bypass Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Auxiliary Water Pump To Water Bypass Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19405

2008 Toyota Prius HVAC Heater Hose ZO 19405

Gates HVAC Heater Hose 19405 - Water Valve Assembly To Auxiliary Water Pump

Position: Water Valve Assembly To Auxiliary Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Water Valve Assembly To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Water Valve Assembly To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19403

2008 Toyota Prius HVAC Heater Hose ZO 19403

Gates HVAC Heater Hose 19403 - Water Valve Assembly To Coolant Heat Storage Tank

Position: Water Valve Assembly To Coolant Heat Storage Tank

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Water Valve Assembly To Coolant Heat Storage Tank
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Water Valve Assembly To Coolant Heat Storage Tank

Part Name: HVAC Heater HoseBrand: GatesPart#: 19404

2008 Toyota Prius HVAC Heater Hose ZO 19404

Gates HVAC Heater Hose 19404 - Engine To Valve

Position: Engine To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Engine To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Engine To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19395

2008 Toyota Prius HVAC Heater Hose ZO 19395

Gates HVAC Heater Hose 19395 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.8
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.5L L4	Base, Touring	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19394

2008 Toyota Prius HVAC Heater Hose ZO 19394

Gates HVAC Heater Hose 19394 - Heater To Auxiliary Water Pump

Position: Heater To Auxiliary Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.3
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.5L L4 Base, Touring Molded Heater Hose Fuel Type: ELECTRIC/GAS Heater To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14445S
CARQUEST	19394
Duralast	C87925
Gates	19394
Honda	87245-47230
NAPA	11394

ACDelco	16389M
CARQUEST	19395
Duralast	D87926
Gates	19395
Honda	87245-47240
NAPA	11395

My Vehicle:

2008 Toyota Prius HVAC Heater Hose

Gates HVAC Heater Hose 19400 - Inverter Cooling Hose-5

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19397 - Inverter Cooling Hose-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19398 - Inverter Cooling Hose-3

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19402 - Coolant Heat Storage Tank To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19396 - Inverter Cooling Hose-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87925 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87926 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19401 - Auxiliary Water Pump To Water Bypass Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19405 - Water Valve Assembly To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19403 - Water Valve Assembly To Coolant Heat Storage Tank

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19404 - Engine To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19395 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19394 - Heater To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X