2015 Toyota Prius HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 20338

Gates HVAC Heater Hose 20338 - Heater Valve To EGR

Position: Heater Valve To EGR

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 4

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Coolant Hose Fuel Type: ELECTRIC/GAS Heater Valve To EGR
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Heater Valve To EGR

Part Name: HVAC Heater HoseBrand: GatesPart#: 18090

2015 Toyota Prius HVAC Heater Hose ZO 18090

Gates HVAC Heater Hose 18090 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.1
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Heater Hose Fuel Type: ELECTRIC/GAS Pipe To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Pipe To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18798

2015 Toyota Prius HVAC Heater Hose ZO 18798

Gates HVAC Heater Hose 18798 - Pipe-5 To Pipe-6

Position: Pipe-5 To Pipe-6

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.2
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Cut to fit - Molded Heater Hose Fuel Type: ELECTRIC/GAS Pipe-5 To Pipe-6
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Cut to fit - Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Pipe-5 To Pipe-6

Part Name: HVAC Heater HoseBrand: GatesPart#: 18007

2015 Toyota Prius HVAC Heater Hose ZO 18007

Gates HVAC Heater Hose 18007 - Pipe-4 To Pipe-5

Position: Pipe-4 To Pipe-5

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Heater Hose Fuel Type: ELECTRIC/GAS Pipe-4 To Pipe-5
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Pipe-4 To Pipe-5

Part Name: HVAC Heater HoseBrand: GatesPart#: 18009

2015 Toyota Prius HVAC Heater Hose ZO 18009

Gates HVAC Heater Hose 18009 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.2
Inside Diameter 1 : .52
Inside Diameter 2 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Heater Hose Fuel Type: ELECTRIC/GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87971

2015 Toyota Prius HVAC Heater Hose DY 87971

Dayco HVAC Heater Hose 87971 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 1
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Position
1.8L L4 Five, Four, One, Persona Series, Base, Premium, Three, Two Small I.D. Heater Hose Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	Five, Four, One, Persona Series, Base, Premium, Three, Two	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87963

2015 Toyota Prius HVAC Heater Hose DY 87963

Dayco HVAC Heater Hose 87963 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 1/4
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Position
1.8L L4 Three, Two, Base, Five, Four, One, Persona Series, Premium Small I.D. Heater Hose Pipe To Heater
Part Interchange
ACDelco 14552S
Duralast C87963
Gates 18007
NAPA 10007
Toyota 87245-47310
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
1.8L L4	Three, Two, Base, Five, Four, One, Persona Series, Premium	Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18003

2015 Toyota Prius HVAC Heater Hose ZO 18003

Gates HVAC Heater Hose 18003 - Inverter Cooling Hose-2

Position: Inverter Cooling Hose-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 17.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18002

2015 Toyota Prius HVAC Heater Hose ZO 18002

Gates HVAC Heater Hose 18002 - Inverter Cooling Hose-1

Position: Inverter Cooling Hose-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 24.9
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Heater Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Inverter Cooling Hose-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2015 Toyota Prius HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Converter To Pipe-2, Inverter Cooling Hose-4

Position: Converter To Pipe-2, Inverter Cooling Hose-4

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2015 Toyota Prius Engines.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	Base, Five, Four, One, Persona Series, Premium, Three, Two	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: ELECTRIC/GAS	Converter To Pipe-2, Inverter Cooling Hose-4

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 23773

2015 Toyota Prius HVAC Heater Hose ZO 23773

Gates HVAC Heater Hose 23773 - Inverter Cooling Hose-3

Position: Inverter Cooling Hose-3

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 48.3
Inside Diameter 1 : .63
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Toyota Prius Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 Base, Five, Four, One, Persona Series, Premium, Three, Two Molded Coolant Hose Fuel Type: ELECTRIC/GAS Inverter Cooling Hose-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14552S
Duralast	C87963
Gates	18007
NAPA	10007
Toyota	87245-47310

My Vehicle:

2015 Toyota Prius HVAC Heater Hose

Gates HVAC Heater Hose 20338 - Heater Valve To EGR

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18090 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18798 - Pipe-5 To Pipe-6

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18007 - Pipe-4 To Pipe-5

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18009 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87971 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87963 - Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18003 - Inverter Cooling Hose-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18002 - Inverter Cooling Hose-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Converter To Pipe-2, Inverter Cooling Hose-4

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23773 - Inverter Cooling Hose-3

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X