2010 Toyota RAV4 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18357

Gates HVAC Heater Hose 18357 - Pipe To Engine, Pipe-1 To Engine

Position: Pipe To Engine, Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.2
Inside Diameter 1 : .36
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Limited, Sport Molded Heater Hose Fuel Type: GAS Pipe-1 To Engine
3.5L V6 Base, Limited, Sport Molded Heater Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Limited, Sport	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine
3.5L V6	Base, Limited, Sport	Molded Heater Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87675

2010 Toyota RAV4 HVAC Heater Hose DY 87675

Dayco HVAC Heater Hose 87675 - Tee To Engine (Outlet)

Position: Tee To Engine (Outlet)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Position
2.5L L4 Base, Limited, Sport Cut to Fit - Small I.D. Heater Hose Tee To Engine (Outlet)

Engine	Sub Model	Notes	Position
2.5L L4	Base, Limited, Sport	Cut to Fit - Small I.D. Heater Hose	Tee To Engine (Outlet)

Part Interchange

ACDelco	14245S
ACDelco	14122S
CARQUEST	19183
CARQUEST	18821
Chrysler	05005373AB
Chrysler	05005373AC
Chrysler	04596703AB
Duralast	C87675
Ford	F77Z-18472-KB
Ford	1R3H-18K580-C
Freshstart	4395
Gates	19183
Gates	18821
General Motors	10135306
General Motors	25525788
Goodyear	63124
NAPA	10821
NAPA	11183
Toyota	97209-0R040
Toyota	87245-42420
V&W	303675

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19670

2010 Toyota RAV4 HVAC Heater Hose ZO 19670

Gates HVAC Heater Hose 19670 - Thermostat To Pipe

Position: Thermostat To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport Molded Heater Hose Fuel Type: GAS Thermostat To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Base, Limited, Sport	Molded Heater Hose	Fuel Type: GAS	Thermostat To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18239

2010 Toyota RAV4 HVAC Heater Hose ZO 18239

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Limited, Sport Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Limited, Sport	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18119

2010 Toyota RAV4 HVAC Heater Hose ZO 18119

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe-2

Position: Throttle Body To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.5
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Limited, Sport Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Limited, Sport	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18821

2010 Toyota RAV4 HVAC Heater Hose ZO 18821

Gates HVAC Heater Hose 18821 - Tee To Engine

Position: Tee To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Limited, Sport Cut to fit - Molded Heater Hose Fuel Type: GAS Tee To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Limited, Sport	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87820

2010 Toyota RAV4 HVAC Heater Hose DY 87820

Dayco HVAC Heater Hose 87820 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 5/16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Position
3.5L V6 Base, Limited, Sport Small I.D. Heater Hose Heater To Engine

Engine	Sub Model	Notes	Position
3.5L V6	Base, Limited, Sport	Small I.D. Heater Hose	Heater To Engine

Part Interchange

ACDelco	16518M
ACDelco	16342M
ACDelco	16378M
ACDelco	16261M
CARQUEST	19093
CARQUEST	19583
CARQUEST	19371
CARQUEST	19312
Duralast	D87820
Freshstart	4660
Gates	19371
Gates	19312
Gates	19093
Goodyear	63525
NAPA	11312
NAPA	11583
NAPA	11093
NAPA	11371
Toyota	87245-42380
Toyota	87245-33520
Toyota	87245-06140
Toyota	87245-02500
Toyota	87245-06380
Toyota	87245-0R010

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19582

2010 Toyota RAV4 HVAC Heater Hose ZO 19582

Gates HVAC Heater Hose 19582 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Limited, Sport Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Limited, Sport	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87951

2010 Toyota RAV4 HVAC Heater Hose DY 87951

Dayco HVAC Heater Hose 87951 - Heater To Tee (Outlet)

Position: Heater To Tee (Outlet)

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Position
2.5L L4 Base, Limited, Sport Small I.D. Heater Hose Heater To Tee (Outlet)
Part Interchange
ACDelco 16517M
Duralast E87951
Gates 19582
Goodyear 64579
NAPA 11582
Toyota 87245-42410
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, Limited, Sport	Small I.D. Heater Hose	Heater To Tee (Outlet)

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87956

2010 Toyota RAV4 HVAC Heater Hose DY 87956

Dayco HVAC Heater Hose 87956 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 3/4
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Position
2.5L L4 Base, Limited, Sport Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 16516M
Duralast E87956
Gates 19581
Goodyear 64161
NAPA 11581
Toyota 87209-0R030
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, Limited, Sport	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2010 Toyota RAV4 HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body Inlet, Throttle Body Outlet

Position: Throttle Body Inlet, Throttle Body Outlet

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2010 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Base, Limited, Sport Cut to Length, 8" - Straight Heater Hose (Standard) Fuel Type: GAS Throttle Body Inlet, Throttle Body Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16517M
Duralast	E87951
Gates	19582
Goodyear	64579
NAPA	11582
Toyota	87245-42410

ACDelco	16516M
Duralast	E87956
Gates	19581
Goodyear	64161
NAPA	11581
Toyota	87209-0R030

My Vehicle:

2010 Toyota RAV4 HVAC Heater Hose

Gates HVAC Heater Hose 18357 - Pipe To Engine, Pipe-1 To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87675 - Tee To Engine (Outlet)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19670 - Thermostat To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18821 - Tee To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87820 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19582 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87951 - Heater To Tee (Outlet)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87956 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body Inlet, Throttle Body Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X