2013 Toyota RAV4 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19955

Gates HVAC Heater Hose 19955 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.23
Inside Diameter 1 : .36
Inside Diameter 2 : .44
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Molded Heater Hose Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Molded Heater Hose	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87830

2013 Toyota RAV4 HVAC Heater Hose DY 87830

Dayco HVAC Heater Hose 87830 - Connector To Pipe

Position: Connector To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Position
2.5L L4 LE, Limited, XLE Cut to Fit - Small I.D. Heater Hose Connector To Pipe
Part Interchange
ACDelco 14822S
ACDelco 14405S
CARQUEST 19954
CARQUEST 19333
Duralast B87830
Gates 19333
Gates 19954
Goodyear 64274
NAPA 11954
NAPA 11333
Toyota 87245-42540
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	LE, Limited, XLE	Cut to Fit - Small I.D. Heater Hose	Connector To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 18239

2013 Toyota RAV4 HVAC Heater Hose ZO 18239

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 18119

2013 Toyota RAV4 HVAC Heater Hose ZO 18119

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe-2

Position: Throttle Body To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.5
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Cut to fit - Molded Heater Hose Fuel Type: GAS Throttle Body To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Throttle Body To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18030

2013 Toyota RAV4 HVAC Heater Hose ZO 18030

Gates HVAC Heater Hose 18030 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .38
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19954

2013 Toyota RAV4 HVAC Heater Hose ZO 19954

Gates HVAC Heater Hose 19954 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Molded Heater Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19968

2013 Toyota RAV4 HVAC Heater Hose ZO 19968

Gates HVAC Heater Hose 19968 - Tee To Engine

Position: Tee To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.06
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Molded Heater Hose Fuel Type: GAS Tee To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	LE, Limited, XLE, Limited Platinum	Molded Heater Hose	Fuel Type: GAS	Tee To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19967

2013 Toyota RAV4 HVAC Heater Hose ZO 19967

Gates HVAC Heater Hose 19967 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Toyota RAV4 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 LE, Limited, XLE, Limited Platinum Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2013 Toyota RAV4 HVAC Heater Hose

Gates HVAC Heater Hose 19955 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87830 - Connector To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19954 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19968 - Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19967 - Heater Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14822S
ACDelco	14405S
CARQUEST	19954
CARQUEST	19333
Duralast	B87830
Gates	19333
Gates	19954
Goodyear	64274
NAPA	11954
NAPA	11333
Toyota	87245-42540

My Vehicle:

2013 Toyota RAV4 HVAC Heater Hose

Gates HVAC Heater Hose 19955 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87830 - Connector To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18119 - Throttle Body To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18030 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19954 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19968 - Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19967 - Heater Inlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X