2003 Toyota Sienna HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18853

Gates HVAC Heater Hose 18853 - Tee To Intake Manifold

Position: Tee To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.4
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited W/Aux. Heater - Molded Heater Hose Fuel Type: GAS Tee To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	W/Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Tee To Intake Manifold

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80401

2003 Toyota Sienna HVAC Heater Hose DY 80401

Dayco HVAC Heater Hose 80401 - Heater To Tee

Position: Heater To Tee

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE w/Aux. Heater - 90? Molded Coolant Hose Heater To Tee

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	w/Aux. Heater - 90? Molded Coolant Hose	Heater To Tee

Part Interchange

ACDelco	14494S
ACDelco	16382M
ACDelco	16328M
ACDelco	16198M
ACDelco	18060L
Atlas	MH-61
CARQUEST	28467
CARQUEST	19498
CARQUEST	19377
CARQUEST	19290
CARQUEST	18888
Chrysler	4677422
Chrysler	55056673AC
Chrysler	MR439546
Chrysler	55037607AB
Chrysler	55037607AC
Chrysler	55036415
Chrysler	5058859AC
Chrysler	55036777
Duralast	D80401
Ford	1R3H-18K579-CB
Ford	1L5H-18472-FA
Ford	1R3Z-18472-CA
Ford	YR3H-18K580-AA
Ford	1R3H-18K579-CE
Ford	E9SE-8597-BE
Ford	F6ZZ-18472-CC
Ford	F77A-18472-A
Ford	F77Z-18472-A
Ford	F77H-18D334-BC
Ford	F77Z-18472-BA
Ford	F6ZH-18K580-AF
Ford	F77A-18472-BB
Ford	E9SZ-8597-A
Ford	F7DH-18K579-BA
Ford	E9SZ-8597-B
Ford	XF1H-18K579-B
Freshstart	4102
Gates	19498
Gates	19290
Gates	18888
Gates	28467
Gates	19377
General Motors	10284269
General Motors	22712142
General Motors	1641237
General Motors	14100798
General Motors	10284268
General Motors	55036942
General Motors	10007473
General Motors	22551240
General Motors	10145102
Goodyear	63812
Goodyear	64323
Honda	19504-RAA-A00
Kia	0K30E-61-212A
Mazda	NC10-61-212
Mitsubishi	MR296878
Motorcraft	KH57
Motorcraft	KM1747
NAPA	10888
NAPA	11290
NAPA	11498
NAPA	9808
NAPA	11377
Pirelli	43812
Suzuki	17856-86Z00
Toyota	87245-1B251
Toyota	87245-2D550
Toyota	87245-3A820
Volvo Cars	9485591
White	33-0135712

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18798

2003 Toyota Sienna HVAC Heater Hose ZO 18798

Gates HVAC Heater Hose 18798 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.2
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2003 Toyota Sienna HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Heater To Valve, Pipe To Auxiliary Heater

Position: Heater To Valve, Pipe To Auxiliary Heater

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE 90? Molded Coolant Hose Heater To Valve, Pipe To Auxiliary Heater

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	90? Molded Coolant Hose	Heater To Valve, Pipe To Auxiliary Heater

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87626

2003 Toyota Sienna HVAC Heater Hose DY 87626

Dayco HVAC Heater Hose 87626 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE w/A.C., w/o Aux. Heater - Small I.D. Heater Hose Heater To Valve
Part Interchange
ACDelco 14084S
CARQUEST 18739
Duralast C87626
Ford E90H-18D334-F
Ford YS4Z-18472-BA
Ford 1M51-18C256-AA
Gates 18739
Goodyear 63144
NAPA 10739
V&W 303626
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	w/A.C., w/o Aux. Heater - Small I.D. Heater Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80402

2003 Toyota Sienna HVAC Heater Hose DY 80402

Dayco HVAC Heater Hose 80402 - Tee To Engine

Position: Tee To Engine

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE 90? Molded Coolant Hose Tee To Engine

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	90? Molded Coolant Hose	Tee To Engine

Part Interchange

ACDelco	16481M
ACDelco	16395M
ACDelco	16347M
ACDelco	16677M
ACDelco	18149L
ACDelco	22570M
ACDelco	18408L
ACDelco	16340M
ACDelco	18021L
Atlas	MH-62
CARQUEST	19323
CARQUEST	28468
CARQUEST	19413
CARQUEST	18447
Chrysler	4462374
Chrysler	55036089
Chrysler	55036507
Chrysler	55036413AB
Chrysler	5058097AD
Chrysler	4677421
Chrysler	55036948
Chrysler	55056674AC
Datsun/Nissan	92400-6M100
Datsun/Nissan	92410-6Z500
Datsun/Nissan	92410-6M100
Datsun/Nissan	92400-9E000
Datsun/Nissan	92400-6Z500
Duralast	E80402
Freshstart	4103
Gates	28468
Gates	23149
Gates	19890
Gates	19323
Gates	19310
Gates	12083
Gates	19413
Gates	18447
Gates	19551
General Motors	94858013
General Motors	22682501
General Motors	15286611
General Motors	15570994
General Motors	15821186
General Motors	22627222
Goodyear	63818
Honda	79721-SX0-000
Honda	79725-SDB-A60
Honda	79725-SDA-A00
Honda	79721-SDB-A60
Honda	79725-S9A-A00
Hyundai	97312-2F400
Hyundai	97321-38000
Hyundai	97312-26200
Hyundai	97311-38030
Hyundai	97321-2D100
Hyundai	97312-2D100
Hyundai	97311-38300
Hyundai	97322-26200
NAPA	11413
NAPA	11310
NAPA	11551
NAPA	11323
NAPA	11890
NAPA	9880
NAPA	10447
NAPA	9809
NAPA	13083
Pirelli	43818
Subaru (cars)	72015-AA020
Subaru (cars)	72421-AE02A
Subaru (cars)	72421-AE02B
Suzuki	17871-57B03
Suzuki	17871-57B02
Toyota	87245-0C030
Toyota	87245-21190
Toyota	87245-12D90
Toyota	87245-21192
Volvo Cars	1282933001

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

2003 Toyota Sienna HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2003 Toyota Sienna HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2003 Toyota Sienna Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87804

2003 Toyota Sienna HVAC Heater Hose DY 87804

Dayco HVAC Heater Hose 87804 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 29
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Position
3.0L V6 CE, LE, XLE Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose Heater To Engine

Engine	Sub Model	Notes	Position
3.0L V6	CE, LE, XLE	Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose	Heater To Engine

Part Interchange

ACDelco	18179L
ACDelco	18358L
Chrysler	55116603AE
Duralast	E87804
Ford	YL84-18K580-BF
Ford	YL8Z-18472-DA
Gates	19436
Honda	79721-T2F-A00
Honda	79730-T2F-A00
Mazda	EG21-61-24XB
Motorcraft	KH125
NAPA	11436
NAPA	11164
Toyota	87245-08010

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18739

2003 Toyota Sienna HVAC Heater Hose ZO 18739

Gates HVAC Heater Hose 18739 - Heater To Valve

Position: Heater To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.3
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: GatesPart#: 19164

2003 Toyota Sienna HVAC Heater Hose ZO 19164

Gates HVAC Heater Hose 19164 - Intake Manifold To Heater

Position: Intake Manifold To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 28.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited W/O Aux. Heater - Molded Heater Hose Fuel Type: GAS Intake Manifold To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Intake Manifold To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2003 Toyota Sienna HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body To Intake Manifold

Position: Throttle Body To Intake Manifold

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited Cut to Length, 12" - Straight Heater Hose (Standard) Fuel Type: GAS Throttle Body To Intake Manifold
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	CE, LE, XLE, XLE Limited	Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Intake Manifold

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2003 Toyota Sienna HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-1 To Tee, Auxiliary Heater Pipe-2 To Valve

Position: Auxiliary Heater Pipe-1 To Tee, Auxiliary Heater Pipe-2 To Valve

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Toyota Sienna Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 CE, LE, XLE, XLE Limited Cut to Length, 5" - Straight Heater Hose (Standard) Fuel Type: GAS Auxiliary Heater Pipe-1 To Tee, Auxiliary Heater Pipe-2 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14084S
CARQUEST	18739
Duralast	C87626
Ford	E90H-18D334-F
Ford	YS4Z-18472-BA
Ford	1M51-18C256-AA
Gates	18739
Goodyear	63144
NAPA	10739
V&W	303626

My Vehicle:

2003 Toyota Sienna HVAC Heater Hose

Gates HVAC Heater Hose 18853 - Tee To Intake Manifold

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80401 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18798 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Heater To Valve, Pipe To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87626 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80402 - Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater Pipe-2 To Auxiliary Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87804 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18739 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19164 - Intake Manifold To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Auxiliary Heater Pipe-1 To Tee, Auxiliary Heater Pipe-2 To Valve

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X