2001 Toyota Tacoma HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87663

Dayco HVAC Heater Hose 87663 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX	Small I.D. Heater Hose	Heater To Valve
2.7L L4	Base, DLX, Pre Runner	Small I.D. Heater Hose	Heater To Valve
3.4L V6	S-Runner, Base, DLX, Pre Runner	Small I.D. Heater Hose	Heater To Valve

Part Interchange
ACDelco 14108S
CARQUEST 18801
Datsun/Nissan 14055-55M05
Datsun/Nissan 14056-40F00
Duralast B87663
Freshstart 4369
Gates 18801
Goodyear 64288
Honda 79722-SR0-000
Honda 79722-S02-A00
Honda 79722-SR3-000
NAPA 10801
V&W 303663
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28460

2001 Toyota Tacoma HVAC Heater Hose ZO 28460

Gates HVAC Heater Hose 28460 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2

Position: Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, DLX, Pre Runner	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18801

2001 Toyota Tacoma HVAC Heater Hose ZO 18801

Gates HVAC Heater Hose 18801 - Heater To Valve, Heater To Valve-1

Position: Heater To Valve, Heater To Valve-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve-1
3.4L V6	Base, DLX, Pre Runner, S-Runner	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87673

2001 Toyota Tacoma HVAC Heater Hose DY 87673

Dayco HVAC Heater Hose 87673 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Position
3.4L V6 S-Runner, Base, DLX, Pre Runner Small I.D. Heater Hose Valve To Engine

Engine	Sub Model	Notes	Position
3.4L V6	S-Runner, Base, DLX, Pre Runner	Small I.D. Heater Hose	Valve To Engine

Part Interchange

ACDelco	16215M
ACDelco	14300S
ACDelco	14120S
CARQUEST	18819
CARQUEST	19176
CARQUEST	19129
Duralast	C87673
Freshstart	63313
Gates	19176
Gates	19129
Gates	18819
Goodyear	63313
Honda	79725-S10-A00
Mitsubishi	MB527608
NAPA	11129
NAPA	10819
NAPA	11176
Toyota	87245-04130
V&W	303673

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18020

2001 Toyota Tacoma HVAC Heater Hose ZO 18020

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Position: Pipe-1 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Pre Runner, Base, DLX, S-Runner Cut to fit - Molded Heater Hose Fuel Type: GAS Pipe-1 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Pre Runner, Base, DLX, S-Runner	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2001 Toyota Tacoma HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Tee-2 To Heater

Position: Tee-2 To Heater

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 Base, DLX, Pre Runner W/Aux. Heater; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Tee-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, DLX, Pre Runner	W/Aux. Heater; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee-2 To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87608

2001 Toyota Tacoma HVAC Heater Hose DY 87608

Dayco HVAC Heater Hose 87608 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 38
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Position
2.4L L4 Base, DLX Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 18003L
ACDelco 16314M
CARQUEST 19111
CARQUEST 18074
Duralast E87608
Freshstart 4431
Gates 18074
Gates 19111
General Motors 1632930
Goodyear 63107
NAPA 11111
NAPA 10074
Toyota 87245-04120
V&W 303608
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base, DLX	Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19111

2001 Toyota Tacoma HVAC Heater Hose ZO 19111

Gates HVAC Heater Hose 19111 - Heater To Tee-1, Pipe-1 To Heater, Pipe-1 To Tee-2

Position: Heater To Tee-1, Pipe-1 To Heater, Pipe-1 To Tee-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 34.5
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX	Molded Heater Hose	Fuel Type: GAS	Heater To Tee-1
2.7L L4	Base, DLX, Pre Runner	W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Heater, Pipe-1 To Tee-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80405

2001 Toyota Tacoma HVAC Heater Hose DY 80405

Dayco HVAC Heater Hose 80405 - Heater To Pipe

Position: Heater To Pipe

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Position
2.7L L4 Base, DLX, Pre Runner 90? Molded Coolant Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.7L L4	Base, DLX, Pre Runner	90? Molded Coolant Hose	Heater To Pipe

Part Interchange

ACDelco	16420M
ACDelco	18152L
Atlas	MH-65
CARQUEST	19459
CARQUEST	28471
Chrysler	4462406
Chrysler	5264133
Chrysler	4361127
Chrysler	55037326
Chrysler	4462087
Chrysler	1595160
Duralast	E80405
Ford	F57H-18472-CA
Freshstart	4106
Gates	19459
Gates	28471
General Motors	15545960
General Motors	55036491
Goodyear	63836
Mazda	GK3J-61-24YF
Mazda	GK3J-61-24YG
Mazda	3K3J-61-24YF
Mazda	GK3J-61-24YK
NAPA	9812
NAPA	11459
Pirelli	43836
Toyota	87245-3D490
Toyota	87209-04030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19130

2001 Toyota Tacoma HVAC Heater Hose ZO 19130

Gates HVAC Heater Hose 19130 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.4
Inside Diameter 1 : .64
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, DLX, Pre Runner, S-Runner Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, DLX, Pre Runner, S-Runner	Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19129

2001 Toyota Tacoma HVAC Heater Hose ZO 19129

Gates HVAC Heater Hose 19129 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.2
Inside Diameter 1 : .64
Inside Diameter 2 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Fit Notes Position
3.4L V6 Base, DLX, Pre Runner, S-Runner Molded Heater Hose Fuel Type: GAS Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.4L V6	Base, DLX, Pre Runner, S-Runner	Molded Heater Hose	Fuel Type: GAS	Valve To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87749

2001 Toyota Tacoma HVAC Heater Hose DY 87749

Dayco HVAC Heater Hose 87749 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2001 Toyota Tacoma Engines.
Engine Sub Model Notes Position
3.4L V6 S-Runner, Base, DLX, Pre Runner Cut to Fit - Small I.D. Heater Hose Heater To Pipe
Part Interchange
ACDelco 16111M
ACDelco 1301S
CARQUEST 19130
CARQUEST 18963
Duralast C87749
Gates 18963
Gates 19130
Honda 8-97063-884-0
Isuzu 8-97167-697-0
NAPA 11130
NAPA 10963
Toyota 87245-04140
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.4L V6	S-Runner, Base, DLX, Pre Runner	Cut to Fit - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2001 Toyota Tacoma HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Position: Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: GAS	Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve
2.7L L4	Base, DLX, Pre Runner	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: GAS	Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve
3.4L V6	Base, DLX, Pre Runner, S-Runner	Cut to Length, 11" - Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2001 Toyota Tacoma HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1, Valve-1 To Pipe-1

Position: Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1, Valve-1 To Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX	Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Valve-1 To Pipe-1
2.7L L4	Base, DLX, Pre Runner	W/Aux. Heater; Cut to Length, 5" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2001 Toyota Tacoma HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Position: Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2001 Toyota Tacoma Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	Base, DLX, Pre Runner	W/Aux. Heater; Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14108S
CARQUEST	18801
Datsun/Nissan	14055-55M05
Datsun/Nissan	14056-40F00
Duralast	B87663
Freshstart	4369
Gates	18801
Goodyear	64288
Honda	79722-SR0-000
Honda	79722-S02-A00
Honda	79722-SR3-000
NAPA	10801
V&W	303663

ACDelco	18003L
ACDelco	16314M
CARQUEST	19111
CARQUEST	18074
Duralast	E87608
Freshstart	4431
Gates	18074
Gates	19111
General Motors	1632930
Goodyear	63107
NAPA	11111
NAPA	10074
Toyota	87245-04120
V&W	303608

ACDelco	16111M
ACDelco	1301S
CARQUEST	19130
CARQUEST	18963
Duralast	C87749
Gates	18963
Gates	19130
Honda	8-97063-884-0
Isuzu	8-97167-697-0
NAPA	11130
NAPA	10963
Toyota	87245-04140

My Vehicle:

2001 Toyota Tacoma HVAC Heater Hose

Dayco HVAC Heater Hose 87663 - Heater To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28460 - Auxiliary Heater Pipe-1 To Auxiliary Heater, Auxiliary Heater To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18801 - Heater To Valve, Heater To Valve-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87673 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18020 - Pipe-1 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Tee-2 To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87608 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19111 - Heater To Tee-1, Pipe-1 To Heater, Pipe-1 To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80405 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19130 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19129 - Valve To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87749 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Exhaust Gas Recirculation Valve To Pipe-2, Pipe-1 To Throttle Body, Throttle Body To Exhaust Gas Recirculation Valve, Throttle Body To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Tee-1 To Intake Manifold, Valve To Intake Manifold, Valve To Tee-1, Valve-1 To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Auxiliary Heater Pipe-2 To Tee-2, Tee-1 To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X