2005 Toyota Tundra HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 28460

Gates HVAC Heater Hose 28460 - Pipe-3 To Oil Cooler

Position: Pipe-3 To Oil Cooler

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .5
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Pipe-3 To Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, Limited, SR5	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Oil Cooler

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87681

2005 Toyota Tundra HVAC Heater Hose DY 87681

Dayco HVAC Heater Hose 87681 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Position
4.7L V8 Base, Limited, SR5 Small I.D. Heater Hose Valve To Engine
Part Interchange
ACDelco 16071M
CARQUEST 18836
Duralast D87681
Ford 1L5Z18472CB
Freshstart 4336
Gates 18836
General Motors 1631557
General Motors 14036206
General Motors 10069155
Goodyear 63072
Motorcraft KH53
NAPA 10836
V&W 303681
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.7L V8	Base, Limited, SR5	Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 70873

2005 Toyota Tundra HVAC Heater Hose DY 70873

Dayco HVAC Heater Hose 70873 - Heater To Engine

Position: Heater To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Position
4.7L V8 Base, Limited, SR5 Curved Radiator Hose Heater To Engine

Engine	Sub Model	Notes	Position
4.7L V8	Base, Limited, SR5	Curved Radiator Hose	Heater To Engine

Part Interchange

ACDelco	14221S
CARQUEST	21257
Duralast	B70873
Ford	D4TZ-8548-B
Ford	D3TE-8548-EA
Ford	D4TZ-8548-C
Ford	D3TZ-8548-A
Ford	D3TE-8548-CA
Freshstart	3025
Gates	21257
Goodyear	63003
Goodyear	64369
Kia	97311-3E000
Motorcraft	KM781
Motorcraft	KM780
Motorcraft	KM737
NAPA	7968
Pirelli	43003

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87887

2005 Toyota Tundra HVAC Heater Hose DY 87887

Dayco HVAC Heater Hose 87887 - Heater To Valve

Position: Heater To Valve

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Position
4.0L V6 Base, SR5 Small I.D. Heater Hose Heater To Valve
4.7L V8 Base, Limited, SR5 Small I.D. Heater Hose Heater To Valve
Part Interchange
ACDelco 18223L
ACDelco 18178L
CARQUEST 19168
CARQUEST 19125
Duralast E87887
Ford F58Z-18472-Q
Ford F58H-18C266-BB
Gates 19168
Gates 19125
NAPA 11168
NAPA 11125
Toyota 87245-0C010
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	Base, SR5	Small I.D. Heater Hose	Heater To Valve
4.7L V8	Base, Limited, SR5	Small I.D. Heater Hose	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87671

2005 Toyota Tundra HVAC Heater Hose DY 87671

Dayco HVAC Heater Hose 87671 - Valve To Pipe

Position: Valve To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Position
4.7L V8 Base, Limited, SR5 Cut to Fit - Small I.D. Heater Hose Valve To Pipe
Part Interchange
ACDelco 16206M
ACDelco 14115S
Acura 79721-SJA-A00
CARQUEST 19167
CARQUEST 18814
Duralast C87671
Freshstart 4408
Gates 19167
Gates 18949
Gates 18814
Goodyear 63137
NAPA 10949
NAPA 11167
NAPA 10814
Toyota 87245-0C040
V&W 303671
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.7L V8	Base, Limited, SR5	Cut to Fit - Small I.D. Heater Hose	Valve To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19168

2005 Toyota Tundra HVAC Heater Hose ZO 19168

Gates HVAC Heater Hose 19168 - Heater To Valve, Valve To Heater

Position: Heater To Valve, Valve To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Base, SR5 Molded Heater Hose Fuel Type: GAS Valve To Heater
4.7L V8 Base, Limited, SR5 Molded Heater Hose Fuel Type: GAS Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Base, SR5	Molded Heater Hose	Fuel Type: GAS	Valve To Heater
4.7L V8	Base, Limited, SR5	Molded Heater Hose	Fuel Type: GAS	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87822

2005 Toyota Tundra HVAC Heater Hose DY 87822

Dayco HVAC Heater Hose 87822 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Position
4.0L V6 Base, SR5 Small I.D. Heater Hose Valve To Engine
Part Interchange
ACDelco 18180L
CARQUEST 19160
Duralast E87822
Gates 19160
NAPA 11160
Toyota 87245-0C020
Toyota 87245-0C140
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	Base, SR5	Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 18455

2005 Toyota Tundra HVAC Heater Hose ZO 18455

Gates HVAC Heater Hose 18455 - Pipe-3 To Throttle Body

Position: Pipe-3 To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .5
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Molded Heater Hose Fuel Type: GAS Pipe-3 To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, Limited, SR5	Molded Heater Hose	Fuel Type: GAS	Pipe-3 To Throttle Body

Part Name: HVAC Heater HoseBrand: GatesPart#: 19167

2005 Toyota Tundra HVAC Heater Hose ZO 19167

Gates HVAC Heater Hose 19167 - Valve To Pipe-1

Position: Valve To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Molded Heater Hose Fuel Type: GAS Valve To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, Limited, SR5	Molded Heater Hose	Fuel Type: GAS	Valve To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19166

2005 Toyota Tundra HVAC Heater Hose ZO 19166

Gates HVAC Heater Hose 19166 - Pipe-2 To Heater

Position: Pipe-2 To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.1
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Molded Heater Hose Fuel Type: GAS Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, Limited, SR5	Molded Heater Hose	Fuel Type: GAS	Pipe-2 To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2005 Toyota Tundra HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Cut to Length, 10" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, Limited, SR5	Cut to Length, 10" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2005 Toyota Tundra HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Thermostat To Pipe-3

Position: Thermostat To Pipe-3

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2005 Toyota Tundra Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, Limited, SR5 Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Thermostat To Pipe-3
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16071M
CARQUEST	18836
Duralast	D87681
Ford	1L5Z18472CB
Freshstart	4336
Gates	18836
General Motors	1631557
General Motors	14036206
General Motors	10069155
Goodyear	63072
Motorcraft	KH53
NAPA	10836
V&W	303681

ACDelco	18223L
ACDelco	18178L
CARQUEST	19168
CARQUEST	19125
Duralast	E87887
Ford	F58Z-18472-Q
Ford	F58H-18C266-BB
Gates	19168
Gates	19125
NAPA	11168
NAPA	11125
Toyota	87245-0C010

ACDelco	16206M
ACDelco	14115S
Acura	79721-SJA-A00
CARQUEST	19167
CARQUEST	18814
Duralast	C87671
Freshstart	4408
Gates	19167
Gates	18949
Gates	18814
Goodyear	63137
NAPA	10949
NAPA	11167
NAPA	10814
Toyota	87245-0C040
V&W	303671

ACDelco	18180L
CARQUEST	19160
Duralast	E87822
Gates	19160
NAPA	11160
Toyota	87245-0C020
Toyota	87245-0C140

My Vehicle:

2005 Toyota Tundra HVAC Heater Hose

Gates HVAC Heater Hose 28460 - Pipe-3 To Oil Cooler

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87681 - Valve To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 70873 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87887 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87671 - Valve To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19168 - Heater To Valve, Valve To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87822 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18455 - Pipe-3 To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19167 - Valve To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19166 - Pipe-2 To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Thermostat To Pipe-3

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X