2012 Toyota Venza HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18239

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Position: Engine To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6.6
Inside Diameter 1 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 AWD, Base, LE, XLE Molded Heater Hose Fuel Type: GAS Engine To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	AWD, Base, LE, XLE	Molded Heater Hose	Fuel Type: GAS	Engine To Throttle Body

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86123

2012 Toyota Venza HVAC Heater Hose DY 86123

Dayco HVAC Heater Hose 86123 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Position
3.5L V6 AWD V6, LE, Limited, V6, XLE Small I.D. Heater Hose Heater Outlet

Engine	Sub Model	Notes	Position
3.5L V6	AWD V6, LE, Limited, V6, XLE	Small I.D. Heater Hose	Heater Outlet

Part Interchange

ACDelco	18436L
ACDelco	16229M
ACDelco	16522M
ACDelco	18065L
ACDelco	18471L
CARQUEST	19962
CARQUEST	19588
CARQUEST	18149
CARQUEST	19211
CARQUEST	18894
Duralast	E86123
Freshstart	4422
Gates	19211
Gates	18149
Gates	19962
Gates	18894
Gates	19588
General Motors	88958084
General Motors	10288180
General Motors	10352383
Goodyear	63151
Honda	79725-SV4-000
Honda	79721-T0G-A00
Honda	18894
Hyundai	97312-2C200
NAPA	11588
NAPA	11962
NAPA	11211
NAPA	10149
NAPA	10894
Toyota	87245-06840
Toyota	87245-0T020

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2012 Toyota Venza HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Pipe

Position: Engine To Throttle Body, Throttle Body To Pipe

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 AWD V6, LE, Limited, V6, XLE Cut to Length, 7" - Straight Heater Hose (Standard) Fuel Type: GAS Engine To Throttle Body, Throttle Body To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	AWD V6, LE, Limited, V6, XLE	Cut to Length, 7" - Straight Heater Hose (Standard)	Fuel Type: GAS	Engine To Throttle Body, Throttle Body To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2012 Toyota Venza HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Reservoir To Filler Neck

Position: Reservoir To Filler Neck

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 AWD, Base, LE, XLE Cut to Length, 23" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Filler Neck
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	AWD, Base, LE, XLE	Cut to Length, 23" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Filler Neck

Part Name: HVAC Heater HoseBrand: GatesPart#: 19585

2012 Toyota Venza HVAC Heater Hose ZO 19585

Gates HVAC Heater Hose 19585 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.2
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 AWD, Base, LE, XLE Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.7L L4	AWD, Base, LE, XLE	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19586

2012 Toyota Venza HVAC Heater Hose ZO 19586

Gates HVAC Heater Hose 19586 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 27.4
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Toyota Venza Engines.
Engine Sub Model Notes Fit Notes Position
2.7L L4 AWD, Base, LE, XLE Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2012 Toyota Venza HVAC Heater Hose

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86123 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19585 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19586 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2012 Toyota Venza HVAC Heater Hose

Gates HVAC Heater Hose 18239 - Engine To Throttle Body

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86123 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Engine To Throttle Body, Throttle Body To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Reservoir To Filler Neck

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19585 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19586 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X