2006 Volkswagen Golf HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19998

Gates HVAC Heater Hose 19998 - Housing To Transmission Oil Cooler

Position: Housing To Transmission Oil Cooler

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.2
Inside Diameter 1 : .60
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GL, GLS Molded Heater Hose Fuel Type: GAS Housing To Transmission Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GL, GLS	Molded Heater Hose	Fuel Type: GAS	Housing To Transmission Oil Cooler

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87621

2006 Volkswagen Golf HVAC Heater Hose DY 87621

Dayco HVAC Heater Hose 87621 - Housing To Transmission Oil Cooler

Position: Housing To Transmission Oil Cooler

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Position
2.0L L4 Europa, GL, GLS Cut to Fit - Small I.D. Heater Hose Housing To Transmission Oil Cooler
Part Interchange
ACDelco 16030M
ACDelco 14453S
CARQUEST 19411
CARQUEST 18705
Duralast C87621
Freshstart 4409
Gates 19411
Gates 18705
General Motors 22577837
Goodyear 63138
NAPA 11411
NAPA 10705
Toyota 87245-48560
V&W 303621
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	Europa, GL, GLS	Cut to Fit - Small I.D. Heater Hose	Housing To Transmission Oil Cooler

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88377

2006 Volkswagen Golf HVAC Heater Hose DY 88377

Dayco HVAC Heater Hose 88377 - Heater Inlet, Heater Outlet

Position: Heater Inlet, Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GTI 1.8T Cut to Fit, Reuse OEM Connector - Small I.D. Heater Hose Transmission Control Type: Automatic Heater Inlet, Heater Outlet

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GTI 1.8T	Cut to Fit, Reuse OEM Connector - Small I.D. Heater Hose	Transmission Control Type: Automatic	Heater Inlet, Heater Outlet

Part Interchange

ACDelco	16156M
ACDelco	14196S
ACDelco	14718S
CARQUEST	18583
CARQUEST	19633
CARQUEST	19700
Duralast	D88377
Freshstart	4343
Gates	19700
Gates	19633
Gates	18583
General Motors	25530894
Goodyear	63079
Kia	97311-2K000
NAPA	10583
NAPA	11633
NAPA	11700
V&W	304377

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19997

2006 Volkswagen Golf HVAC Heater Hose ZO 19997

Gates HVAC Heater Hose 19997 - Connector To Pipe

Position: Connector To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GTI 1.8T Molded Heater Hose Fuel Type: GAS - Transmission Control Type: Standard Connector To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GTI 1.8T	Molded Heater Hose	Fuel Type: GAS - Transmission Control Type: Standard	Connector To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19785

2006 Volkswagen Golf HVAC Heater Hose ZO 19785

Gates HVAC Heater Hose 19785 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.1
Inside Diameter 1 : .76
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
1.9L L4 GLS TDI Molded Heater Hose Fuel Type: DIESEL Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.9L L4	GLS TDI	Molded Heater Hose	Fuel Type: DIESEL	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0572

2006 Volkswagen Golf HVAC Heater Hose C8 CHH0572

CRP HVAC Heater Hose CHH0572 - Heater Inlet To Flange

Position: Heater Inlet To Flange

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Position
2.0L L4 Europa, GL, GLS Heater Inlet To Flange
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Position
2.0L L4	Europa, GL, GLS	Heater Inlet To Flange

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88502

2006 Volkswagen Golf HVAC Heater Hose DY 88502

Dayco HVAC Heater Hose 88502 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 1/16
End 2 Inside Diameter : 7/8
End 2 Outside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Position
2.0L L4 Europa, GL, GLS w/Quick Connect - Small I.D. Heater Hose Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	Europa, GL, GLS	w/Quick Connect - Small I.D. Heater Hose	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 24227

2006 Volkswagen Golf HVAC Heater Hose ZO 24227

Gates HVAC Heater Hose 24227 - Reservoir (Lower) To Tee

Position: Reservoir (Lower) To Tee

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.5
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GTI 1.8T Molded Coolant Hose Fuel Type: GAS Reservoir (Lower) To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GTI 1.8T	Molded Coolant Hose	Fuel Type: GAS	Reservoir (Lower) To Tee

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88503

2006 Volkswagen Golf HVAC Heater Hose DY 88503

Dayco HVAC Heater Hose 88503 - Pipe To Heater

Position: Pipe To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 7/8
End 1 Outside Diameter : 1 13/32
End 2 Inside Diameter : 31/32
End 2 Outside Diameter : 1 1/4
End 3 Inside Diameter : 5/16
End 3 Outside Diameter : 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Position
2.0L L4 Europa, GL, GLS w/Quick Connect - Small I.D. Heater Hose Pipe To Heater
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	Europa, GL, GLS	w/Quick Connect - Small I.D. Heater Hose	Pipe To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 12020

2006 Volkswagen Golf HVAC Heater Hose ZO 12020

Gates HVAC Heater Hose 12020 - Tee To Pipe

Position: Tee To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.70
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
1.8L L4 GTI 1.8T Molded Heater Hose Fuel Type: GAS - Transmission Control Type: Standard Tee To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.8L L4	GTI 1.8T	Molded Heater Hose	Fuel Type: GAS - Transmission Control Type: Standard	Tee To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 23825

2006 Volkswagen Golf HVAC Heater Hose ZO 23825

Gates HVAC Heater Hose 23825 - Heater To Pipe

Position: Heater To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11
Inside Diameter 1 : .76
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GL, GLS Molded Coolant Hose Fuel Type: GAS Heater To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GL, GLS	Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 23823

2006 Volkswagen Golf HVAC Heater Hose ZO 23823

Gates HVAC Heater Hose 23823 - Heater To Adapter

Position: Heater To Adapter

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.5
Inside Diameter 1 : .96
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GL, GLS Molded Coolant Hose Fuel Type: GAS Heater To Adapter
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GL, GLS	Molded Coolant Hose	Fuel Type: GAS	Heater To Adapter

Part Name: HVAC Heater HoseBrand: GatesPart#: 28408

2006 Volkswagen Golf HVAC Heater Hose ZO 28408

Gates HVAC Heater Hose 28408 - Throttle Body To Reservoir

Position: Throttle Body To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .3125
Working Pressure : 60
Weight Per Length : 7.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GL, GLS Cut to Length, 24" - Straight Heater Hose (Standard) Fuel Type: GAS Throttle Body To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GL, GLS	Cut to Length, 24" - Straight Heater Hose (Standard)	Fuel Type: GAS	Throttle Body To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2006 Volkswagen Golf HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Oil Cooler To Block, Tee-1 To Oil Cooler

Position: Oil Cooler To Block, Tee-1 To Oil Cooler

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GL, GLS Cut to Length, 13" - Straight Heater Hose (Standard) Fuel Type: GAS Oil Cooler To Block, Tee-1 To Oil Cooler
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GL, GLS	Cut to Length, 13" - Straight Heater Hose (Standard)	Fuel Type: GAS	Oil Cooler To Block, Tee-1 To Oil Cooler

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0147R

2006 Volkswagen Golf HVAC Heater Hose C8 CHH0147R

CRP HVAC Heater Hose CHH0147R - Heater To Flange To Pipe

Position: Heater To Flange To Pipe

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2006 Volkswagen Golf Engines.
Engine Sub Model Notes Position
1.8L L4 GTI 1.8T w/Quick Connectors Heater To Flange To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16030M
ACDelco	14453S
CARQUEST	19411
CARQUEST	18705
Duralast	C87621
Freshstart	4409
Gates	19411
Gates	18705
General Motors	22577837
Goodyear	63138
NAPA	11411
NAPA	10705
Toyota	87245-48560
V&W	303621

My Vehicle:

2006 Volkswagen Golf HVAC Heater Hose

Gates HVAC Heater Hose 19998 - Housing To Transmission Oil Cooler

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87621 - Housing To Transmission Oil Cooler

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88377 - Heater Inlet, Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19997 - Connector To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19785 - Heater To Pipe-1

Description:

Part Specifications:

Features:

CRP HVAC Heater Hose CHH0572 - Heater Inlet To Flange

Description:

Dayco HVAC Heater Hose 88502 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24227 - Reservoir (Lower) To Tee

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88503 - Pipe To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 12020 - Tee To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23825 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23823 - Heater To Adapter

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28408 - Throttle Body To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Oil Cooler To Block, Tee-1 To Oil Cooler

Description:

Part Specifications:

Features:

CRP HVAC Heater Hose CHH0147R - Heater To Flange To Pipe

Description:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X