2007 Volkswagen Jetta Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72478

Dayco Radiator Coolant Hose 72478 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Position
2.5L L5 2.5, Wolfsburg Edition Curved Radiator Hose Upper
Part Interchange
ACDelco 24650L
CARQUEST 23075
Duralast E72478
Gates 23075
Goodyear 66397
NAPA 9740
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L5	2.5, Wolfsburg Edition	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22876

2007 Volkswagen Jetta Radiator Coolant Hose ZO 22876

Gates Radiator Coolant Hose 22876 - Upper - Tee To Engine

Position: Upper - Tee To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.7
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GLI, Trendline Available Until Stock Depleted - Molded Coolant Hose Fuel Type: GAS Upper - Tee To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GLI, Trendline	Available Until Stock Depleted - Molded Coolant Hose	Fuel Type: GAS	Upper - Tee To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22880

2007 Volkswagen Jetta Radiator Coolant Hose ZO 22880

Gates Radiator Coolant Hose 22880 - Upper - Tee To Engine

Position: Upper - Tee To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.3
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
1.9L L4 TDI Molded Coolant Hose Fuel Type: DIESEL - Transmission Control Type: Standard Upper - Tee To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.9L L4	TDI	Molded Coolant Hose	Fuel Type: DIESEL - Transmission Control Type: Standard	Upper - Tee To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22875

2007 Volkswagen Jetta Radiator Coolant Hose ZO 22875

Gates Radiator Coolant Hose 22875 - Upper - Radiator To Tee

Position: Upper - Radiator To Tee

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.2
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GLI, Trendline Available Until Stock Depleted - Molded Coolant Hose Fuel Type: GAS Upper - Radiator To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GLI, Trendline	Available Until Stock Depleted - Molded Coolant Hose	Fuel Type: GAS	Upper - Radiator To Tee

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22884

2007 Volkswagen Jetta Radiator Coolant Hose ZO 22884

Gates Radiator Coolant Hose 22884 - Upper - Radiator To Tee

Position: Upper - Radiator To Tee

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.6
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
1.9L L4 TDI Molded Coolant Hose Fuel Type: DIESEL - Transmission Control Type: Standard Upper - Radiator To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
1.9L L4	TDI	Molded Coolant Hose	Fuel Type: DIESEL - Transmission Control Type: Standard	Upper - Radiator To Tee

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23075

2007 Volkswagen Jetta Radiator Coolant Hose ZO 23075

Gates Radiator Coolant Hose 23075 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.3
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L5 2.5, Wolfsburg Edition Nov. 30, 2006 & Older - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L5	2.5, Wolfsburg Edition	Nov. 30, 2006 & Older - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72435

2007 Volkswagen Jetta Radiator Coolant Hose DY 72435

Dayco Radiator Coolant Hose 72435 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 23 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Position
2.5L L5 2.5, Wolfsburg Edition Curved Radiator Hose Lower
Part Interchange
ACDelco 26522X
CARQUEST 23074
Duralast E72435
Gates 23074
Goodyear 66398
NAPA 9739
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L5	2.5, Wolfsburg Edition	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23074

2007 Volkswagen Jetta Radiator Coolant Hose ZO 23074

Gates Radiator Coolant Hose 23074 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 29.6
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L5 2.5, Wolfsburg Edition Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L5	2.5, Wolfsburg Edition	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: CRPPart#: CHR0399

2007 Volkswagen Jetta Radiator Coolant Hose C8 CHR0399

CRP Radiator Coolant Hose CHR0399 - Upper

Position: Upper

Description:

Rein OE Quality Radiator Hose
Radiator Hose

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L5 2.5, Wolfsburg Edition From 12/1/06, w/Quick Connectors Transmission Control Type: Standard Upper
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L5	2.5, Wolfsburg Edition	From 12/1/06, w/Quick Connectors	Transmission Control Type: Standard	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72876

2007 Volkswagen Jetta Radiator Coolant Hose DY 72876

Dayco Radiator Coolant Hose 72876 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 12
End 1 Inside Diameter : 1 1/4
End 1 Outside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
End 2 Outside Diameter : 1 9/16
End 3 Inside Diameter : 13/16
End 3 Outside Diameter : 13/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose branched assembles are made with knitted reinforcement and all synthetic EPDM rubber construction providing the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Position
2.0L L4 2.0T, GLI Curved Radiator Hose Upper
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	2.0T, GLI	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24727

2007 Volkswagen Jetta Radiator Coolant Hose ZO 24727

Gates Radiator Coolant Hose 24727 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.5
Inside Diameter 1 : 1.26
Inside Diameter 2 : 1.23
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 2.0T, GLI, Europa, Trendline Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	2.0T, GLI, Europa, Trendline	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 73064

2007 Volkswagen Jetta Radiator Coolant Hose DY 73064

Dayco Radiator Coolant Hose 73064 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 1 1/4
End 1 Outside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
End 2 Outside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Position
2.0L L4 2.0T, GLI Curved Radiator Hose Lower
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	2.0T, GLI	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24605

2007 Volkswagen Jetta Radiator Coolant Hose ZO 24605

Gates Radiator Coolant Hose 24605 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20
Number of Branches : 1
Inside Diameter 1 : 1.27
Inside Diameter 2 : 1.27
Inside Diameter 3 : .31
Inside Diameter 4 : .31
Inside Diameter 4 : 8

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L5 2.5, Wolfsburg Edition Dec. 1, 2006 & Newer - Molded Coolant Hose Fuel Type: GAS - Transmission Control Type: Standard Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L5	2.5, Wolfsburg Edition	Dec. 1, 2006 & Newer - Molded Coolant Hose	Fuel Type: GAS - Transmission Control Type: Standard	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24070

2007 Volkswagen Jetta Radiator Coolant Hose ZO 24070

Gates Radiator Coolant Hose 24070 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34
Inside Diameter 1 : 1.2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GLI, Trendline Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	Europa, GLI, Trendline	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24229

2007 Volkswagen Jetta Radiator Coolant Hose ZO 24229

Gates Radiator Coolant Hose 24229 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.25
Inside Diameter 1 : 1
Inside Diameter 2 : 1.22
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2007 Volkswagen Jetta Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 Europa, GLI, Trendline Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	24650L
CARQUEST	23075
Duralast	E72478
Gates	23075
Goodyear	66397
NAPA	9740

ACDelco	26522X
CARQUEST	23074
Duralast	E72435
Gates	23074
Goodyear	66398
NAPA	9739

My Vehicle:

2007 Volkswagen Jetta Radiator Coolant Hose

Dayco Radiator Coolant Hose 72478 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22876 - Upper - Tee To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22880 - Upper - Tee To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22875 - Upper - Radiator To Tee

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22884 - Upper - Radiator To Tee

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23075 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72435 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23074 - Lower

Description:

Part Specifications:

Features:

CRP Radiator Coolant Hose CHR0399 - Upper

Description:

Dayco Radiator Coolant Hose 72876 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24727 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 73064 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24605 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24070 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24229 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X