Home

2009 Volvo C70

My Vehicle:

2009 Volvo C70 HVAC Heater Hose

We have found 5 HVAC Heater Hose for

2009 Volvo C70

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80411

Dayco HVAC Heater Hose 80411 - Heater To Connector

Position: Heater To Connector

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2009 Volvo C70 Engines.
Engine Sub Model Notes Position
2.5L L5 T5 Cut to Fit, Reuse OEM Connector - Top Hose - 90? Molded Coolant Hose Heater To Connector

Engine	Sub Model	Notes	Position
2.5L L5	T5	Cut to Fit, Reuse OEM Connector - Top Hose - 90? Molded Coolant Hose	Heater To Connector

Part Interchange

ACDelco	14592S
ACDelco	14244S
Atlas	MH-71
CARQUEST	18142
CARQUEST	28474
Chrysler	4767172
Datsun/Nissan	92411-0B010
Datsun/Nissan	14055-31U00
Datsun/Nissan	14056-46R00
Duralast	B80411
Ford	F1SE-18472-AA
Ford	F1OY-18472-F
Ford	F32Z-8075-A
Ford	F8CZ-8548-DA
Freshstart	4201
Gates	18142
Gates	28474
General Motors	25537261
General Motors	22646764
General Motors	14099017
General Motors	15530513
General Motors	10190667
General Motors	10188037
General Motors	10135307
General Motors	25525214
General Motors	22601689
General Motors	22612883
General Motors	10065675
General Motors	22610689
General Motors	22602073
Goodyear	63906
Honda	79726-SZA-A00
Mazda	KL11-15-183
Motorcraft	KM3270
NAPA	9815
NAPA	10142

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: CRPPart#: CHH0512

2009 Volvo C70 HVAC Heater Hose C8 CHH0512

CRP HVAC Heater Hose CHH0512 - Heater Outlet Hose To Engine

Position: Heater Outlet Hose To Engine

Description:

Rein OE Quality Heater Hose
Heater Hose

Condition: New

Fitments
This Part Fits Following 2009 Volvo C70 Engines.
Engine Sub Model Position
2.5L L5 T5 Heater Outlet Hose To Engine
Warranty & Easy Return
Manufacturer’s Warranty : 24 months / 24,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Position
2.5L L5	T5	Heater Outlet Hose To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 24604

2009 Volvo C70 HVAC Heater Hose ZO 24604

Gates HVAC Heater Hose 24604

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 8.5
Inside Diameter 1 : .62
Inside Diameter 2 : .82
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Volvo C70 Engines.
Engine Sub Model Notes Fit Notes
2.5L L5 T5 Engine To Heater Outlet - Molded Coolant Hose Fuel Type: GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
2.5L L5	T5	Engine To Heater Outlet - Molded Coolant Hose	Fuel Type: GAS

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87803

2009 Volvo C70 HVAC Heater Hose DY 87803

Dayco HVAC Heater Hose 87803 - Engine To Connector

Position: Engine To Connector

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 24
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2009 Volvo C70 Engines.
Engine Sub Model Notes Position
2.5L L5 T5 Cut to Fit, Reuse OEM Connector - Top Hose - Small I.D. Heater Hose Engine To Connector
Part Interchange
ACDelco 18329L
Acura 79730-TX4-A00
CARQUEST 19348
Duralast E87803
Ford YL84-18K579-CA
Ford 8L8Z-18472-F
Ford 8L84-18K579-A
Ford 8L84-18K579-AG
Gates 19348
Motorcraft KH657
NAPA 11348
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L5	T5	Cut to Fit, Reuse OEM Connector - Top Hose - Small I.D. Heater Hose	Engine To Connector

Part Name: HVAC Heater HoseBrand: GatesPart#: 24603

2009 Volvo C70 HVAC Heater Hose ZO 24603

Gates HVAC Heater Hose 24603 - Engine To Heater Inlet Hose

Position: Engine To Heater Inlet Hose

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.75
Inside Diameter 1 : .62
Inside Diameter 2 : .83
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2009 Volvo C70 Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L5 T5 Molded Coolant Hose Fuel Type: GAS Engine To Heater Inlet Hose
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18329L
Acura	79730-TX4-A00
CARQUEST	19348
Duralast	E87803
Ford	YL84-18K579-CA
Ford	8L8Z-18472-F
Ford	8L84-18K579-A
Ford	8L84-18K579-AG
Gates	19348
Motorcraft	KH657
NAPA	11348

My Vehicle:

2009 Volvo C70 HVAC Heater Hose

Dayco HVAC Heater Hose 80411 - Heater To Connector

Description:

Part Specifications:

Features:

CRP HVAC Heater Hose CHH0512 - Heater Outlet Hose To Engine

Description:

Gates HVAC Heater Hose 24604

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87803 - Engine To Connector

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24603 - Engine To Heater Inlet Hose

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X