Home

1996 AM General Hummer

My Vehicle:

1996 AM General Hummer Engine Coolant Bypass Hose

We have found 4 Engine Coolant Bypass Hose for

1996 AM General Hummer

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 22210

Gates Engine Coolant Bypass Hose 22210

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 5
Inside Diameter 1 : 1
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 AM General Hummer Engines.
Engine Sub Model Notes Fit Notes
6.5L V8 Base Molded Coolant Hose Fuel Type: DIESEL
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
6.5L V8	Base	Molded Coolant Hose	Fuel Type: DIESEL

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 21781

1996 AM General Hummer Engine Coolant Bypass Hose ZO 21781

Gates Engine Coolant Bypass Hose 21781 - Tank To Pipe

Position: Tank To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.4
Inside Diameter 1 : 1.06
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 AM General Hummer Engines.
Engine Sub Model Notes Fit Notes Position
6.5L V8 Base Molded Coolant Hose Fuel Type: DIESEL Tank To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.5L V8	Base	Molded Coolant Hose	Fuel Type: DIESEL	Tank To Pipe

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 28409

1996 AM General Hummer Engine Coolant Bypass Hose ZO 28409

Gates Engine Coolant Bypass Hose 28409 - Tank To Engine, Tank To Radiator

Position: Tank To Engine, Tank To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 AM General Hummer Engines.
Engine Sub Model Notes Fit Notes Position
6.5L V8 Base Cut to Length, 24" - Straight Heater Hose (Standard) Fuel Type: DIESEL Tank To Engine, Tank To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.5L V8	Base	Cut to Length, 24" - Straight Heater Hose (Standard)	Fuel Type: DIESEL	Tank To Engine, Tank To Radiator

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 28412

1996 AM General Hummer Engine Coolant Bypass Hose ZO 28412

Gates Engine Coolant Bypass Hose 28412

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1996 AM General Hummer Engines.
Engine Sub Model Notes Fit Notes
6.5L V8 Base Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: DIESEL
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

1996 AM General Hummer Engine Coolant Bypass Hose

Gates Engine Coolant Bypass Hose 22210

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 21781 - Tank To Pipe

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 28409 - Tank To Engine, Tank To Radiator

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 28412

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X